Read data 131 of simocode-dp DPV1 with SFC 59.

[:cry:][:cry:]

I have a problem for read data from SIMOCODE, with SFC 59.

I have configured simocode like DPV1 in HW config.
Address DP : 4
Diagnosis address: 1022

attempt to use SFC 59 to read the DS_131 data, but I cannot.

REQ = 1 , appears error RET_VEL = 8090 = Address not valid.
In example LADDR =256 inDEC.
W#16#100 in HEX.


Example of OB1:
CALL SFC 59 //Read data record
REQ :=M20.0
IOID :=B#16#54 //Identifier for “inputs”
LADDR :=W#16#100 //Log. base address
//from HW Config
RECNUM :=B#16#83 //DS 131
RET_VAL:=MW22
BUSY :=M20.1
RECORD :=P#DB20.DBX 0.0 BYTE 18
//DB20, bytes 0-17

B.4.2 Reading data record 131 - display/diagnosis

Byte.Bit Parameter identifier Data type Value range
0.0 Operating Hours Byte[2] [0-65535] 10h
2.0 Number of Starts Byte[3] [0-16777216]
5.0 Counter Value 1 Byte[2] [0-65535]
7.0 Counter Value 2 Byte[2] [0-65535]
9.0 Cooling Time Byte[2] [0-35999] 100ms
11.0 Number of Overload Trips Byte[2] [0-65535]
13.0 I-max Byte[2] [0-65535] %
15.0 Last Trip Current Byte[2] [0-65535] %
17.0 Analog Sensor Value Byte [0-255] 20 ohms

How I make it to read the data and to see them? I must create a DB20?

Thanks

Help!!!

Try read data sfc59 (in a cyclic interrupt OB35) - error 80b2

How to obtain diagnostic information (data record 131 - display / diagnosis) from SIMOCODE 3UF5? Simocode work in DPV1

SFC13, SFC14, SFC15 work good

PS: maybe someone has an example