Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Read system status list

Created by: v.kerstholt at: 11/13/2013 7:57 AM (4 Replies)

Rating (0)

Thanks 1

5 Entries

11/13/2013 7:57 AM	Rate (0)
v.kerstholt Posts: 58 Rating: (9)	i used to do: [code] #iReturn := RDSYSST(REQ := true // IN: BOOL ,SZL_ID := 16#94 // IN: WORD ,INDEX := #wMasterSystem // IN: WORD ,BUSY := #bBusy // OUT: BOOL ,SZL_HEADER := #SSL_HEADER // OUT: STRUCT ,DR := #udtBusDiag.wConfig // OUT: ANY ); // INT [/code] to read oud the diagnose of my profinet/profibus Hardware. i now need to do this with GET_DIAG. but there i only can read out one of the hardeware components. How to migrate this function?
v.kerstholt Posts: 58 Rating: (9)
Suggestion To thank Quote Answer

11/13/2013 8:36 AM	Rate (0)
v.kerstholt Posts: 58 Rating: (9)	sorry for al the topics. the forum was giving an error. i found there is a nother function: DeviceStates. trying to solve the problem with that
v.kerstholt Posts: 58 Rating: (9)
Suggestion To thank Quote Answer

5/15/2015 1:39 PM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4767 Rating: (123)	New question published by Iosif is split to a separate thread with the subject Modules without diagnostic functions, possible to read the diagnostic?. Best regards Min_Moderator

Suggestion To thank Quote Answer

8/27/2015 12:54 PM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4767 Rating: (123)	New question published by AnkushGorakh is split to a separate thread with the subject SFC51 in TIA. Best regards Min_Moderator

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users AnkushGorakh

9/28/2018 8:14 AM	Rate (0)
AnkushGorakh Advanced Member Joined: 1/3/2013 Last visit: 8/9/2024 Posts: 10 Rating: (0)	thank you

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on