Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

s5 code understanding

Created by: adam_smelek at: 7/11/2013 6:52 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

7/11/2013 6:52 PM	Rate (0)
adam_smelek Posts: 5 Rating: (0)	Thanks for the Tip :) (didn't figure it out , why bother understanding code if German is useful) I have another question about code, this time it will not be that simple LKF +242 LKH E400 +F LIR0 LKF +255 +F TFW 190 LKH EFFF LFW 190 TNB128 LFW 190 LKF +128 -F TFW 190 LKH EF7F LFW 190 TNB128 If I understand correctly PIQ0 to PIQ127 are mapped on DB121.DBB128 to DB121.DBB255 (following 128 bytes - TNB 128). And PII0 to PII127 are mapped on DB121.DBB0 to DB121.DBB127. If i will do it on S7 CPU may have some error because I don't use ale of PI, am I right? (error trying to read adresses that doesn't exist) If so, i must generate some own code to put inputs and ouputs in right place in DB?
adam_smelek Posts: 5 Rating: (0)	Last edited by: O_Moderator at: 7/12/2013 4:27 PM new subject after splitting from /tf/WW/en/Posts/94637#top
Suggestion To thank Quote Answer

7/12/2013 6:10 PM	Rate (0)
UMENCHO Diamond Expert Joined: 3/21/2006 Last visit: 7/12/2023 Posts: 10221 Rating: (1177)	Yes, you need to write another code in S7 which will make the same as S5. There is discussionpleae help me how to replace "TNB" in S5 by "SFC20" in S7 NW3Follow all links there for more details. Best regards, Hristo Mihalev

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on