Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S7 1200 axis configuration

Created by: Farooq Viquar at: 1/2/2014 8:23 AM (5 Replies)

Rating (0)

Thanks 2

6 Entries

1/2/2014 8:23 AM	Rate (0)
Farooq Viquar Posts: 16 Rating: (0)	Hi I am using a S7 1200 1214C dc/dc/dc, with 2 numbers of 16DI/16DO module and 1 16DI module as extensions. I am using 3 axes in that, When I configured axis1 with limit switches and proxy in the main module, it worked OK, but in the second axis when I assign limit switch from the 2nd extension module, it shows error "inputDoesn’tgenerate alarm", please help. Is it necessary to assign all the limit switches to the main module?
Farooq Viquar Posts: 16 Rating: (0)
Suggestion To thank Quote Answer

1/2/2014 10:14 AM	Rate (0)
Ganes10 Platinum Member Joined: 8/31/2010 Last visit: 11/6/2024 Posts: 1523 Rating: (229)	Farooq Viquar Hi I am using a S7 1200 1214C dc/dc/dc, with 2 numbers of 16DI/16DO module and 1 16DI module as extensions. I am using 3 axes in that, When I configured axis1 with limit switches and proxy in the main module, it worked OK, but in the second axis when I assign limit switch from the 2nd extension module, it shows error "inputDoesn’tgenerate alarm", please help. Is it necessary to assign all the limit switches to the main module? Hello Farooq Viquar, There is no such restriction of assigning IOs to main module (CPU).
	Like it? Rate it!
Suggestion To thank Quote Answer

1/2/2014 10:28 AM	Rate (0)
Farooq Viquar Posts: 16 Rating: (0)	Thank you But it's not working......
Farooq Viquar Posts: 16 Rating: (0)
Suggestion To thank Quote Answer

1/2/2014 10:42 AM	Rate (0)
Ganes10 Platinum Member Joined: 8/31/2010 Last visit: 11/6/2024 Posts: 1523 Rating: (229)	Farooq Viquar Thank you But it's not working...... Hello Farooq Viquar, Kindly post the screenshots of the same.
	Like it? Rate it!
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Farooq Viquar

1/2/2014 11:03 AM	Rate (0)
Farooq Viquar Posts: 16 Rating: (0)	Hi PLease find the attached file. Attachment Error.zip (573 Downloads)
Farooq Viquar Posts: 16 Rating: (0)
Suggestion To thank Quote Answer

1/24/2014 7:37 PM	Rate (0)
farshid BG Posts: 5 Rating: (0)	u need to enable the raising and falling edge of the limit switch. in order to do this go to DEVICE MANAGMENT> DI14,DQ > under digital inputs find the related input which the limit switch is connected and check the box for both raising and falling edges. remember you have to assign two limit switches for positioning configuration. regards farshid BG
farshid BG Posts: 5 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Tomy Master

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on