Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S7-1200 Communication via Profibus DP Slave and Master Modules

Created by: OEEKB at: 10/24/2012 9:44 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

10/24/2012 9:44 PM	Rate (0)
OEEKB Posts: 1 Rating: (0)	I am setting up a Network using 1 S7-1200 with a Master Module and 3+ S7-1200's with Slave Modules. This is my first time in using Profibus DP and also my first time in TIA Portal. I am not understanding where and how I go in the software to set up my Tags between the devices. Any suggestions or sample projects would be greatly appreciated.
OEEKB Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

10/25/2012 9:59 AM	Rate (0)
fbelic Silver Member Joined: 2/17/2009 Last visit: 12/1/2020 Posts: 327 Rating: (28)	Greetings Is there any special reason why you are making such configuration with PROFIBUS instead S7-1200's native PROFINET? Best regards

Suggestion To thank Quote Answer

10/25/2012 10:55 AM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 5/16/2023 Posts: 8586 Rating: (1127)	Hello, Here are some manuals: SIMATIC NET S7-1200 - PROFIBUS CM 1243-5 Operating Instructions SIMATIC NET S7-1200 - PROFIBUS CM 1242-5 Operating Instructions Best regards, Wizard

Suggestion To thank Quote Answer

4/23/2019 9:22 PM	Rate (0)
newbiplc Posts: 24 Rating: (1)	We can guess why good reasons one might do this even if op doesn't let us know in his particular case. There's lots of sensors on the market that have profibus but still don't have profinet. This is a good reason to add profibus master functionality to your controller. Profibus can travel long distances. It might be the cheapest way in many cases. This could be a good reason to add profibus device functionality.
newbiplc Posts: 24 Rating: (1)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on