Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

SCALE FC105

Created by: Denker at: 8/12/2009 1:02 AM (6 Replies)

Rating (2)

Thanks 1

7 Entries

8/12/2009 1:02 AM	Rate (0)
Denker Posts: 90 Rating: (0)	Hello, I have an issue about SCALE function block (FC105) and please, I need help. I readin online helpabout the input range between -27648and 27648 used in FC105. If I use one SM331 (AI module) with 16 bits (15 bits + sign), I have a range to use between -32511 and 32511in some cases(near2^15). So, willI lose resolution using FC105 block ??Should I only usethis block for 14 bits resolution? And, what the reason of the value 27648 ? Greetings.
Denker Posts: 90 Rating: (0)
Suggestion To thank Quote Answer

8/12/2009 4:18 AM	Rate (1)
ddg Posts: 261 Rating: (42)	Hi Denker The issue has been already discussed. See the attach file. Hope it helps you. Regards ddg Attachment analog_value.pdf (787 Downloads)
ddg Posts: 261 Rating: (42)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Jazz_M

10/6/2009 12:53 PM	Rate (0)
Jazz_M Gold Member Joined: 9/6/2008 Last visit: 5/7/2022 Posts: 1121 Rating: (86)	Hi Denker any one can correct me if i am wrong We use thermocouples for the scaling purpose we multiply the incomming raw value with a factor say for t/c we have a count as 0 - 12000 then we mul it with 2.304 for conversion to 0 - 27648 so you can also mul with a factor say 0.85041 i got this by 27648/32511 = 0.85041 mul this with your raw value you can get the value between 0 - 27648 counts and rest is piece of cake. Best regards Tagolover
	Last edited by: O_Moderator at: 10/6/2009 1:25 PM new subject after splitting Jazz
Suggestion To thank Quote Answer

10/24/2009 2:39 PM	Rate (0)
Ayman Elotaify Platinum Expert Joined: 5/28/2008 Last visit: 11/29/2023 Posts: 4485 Rating: (834)	Dear Denker, I think the following thread would be very useful for you: How 27648 Analaog Maximum Value ? Regards,
	Ayman Elotaify
Suggestion To thank Quote Answer

11/29/2009 3:15 AM	Rate (0)
HongLinhautomationVN Posts: 1 Rating: (0)	Hi ddg,i can't download your attachment.I'm so happy if u send it to me by email :honglinhatqn@gmail.com Thanks a lot
HongLinhautomationVN Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

11/29/2009 8:07 PM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 11/14/2023 Posts: 10222 Rating: (1177)	Hello, You could find this documents in http://support.automation.siemens.com/WW/view/en/8859629 (5. Chapter - Representation of the analog values of analog modules) Regards, Hristo Mihalev

Suggestion To thank Quote Answer

11/29/2009 10:29 PM	Rate (1)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 8/24/2023 Posts: 4099 Rating: (193)	Hello HongLinhautomationVN, welcome to our Technical Forum. You have to be logged in first befor you could start a download of an attachment. If you still got a problem please post again. Best regards CS Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on