Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Simocode Pro C and PCS7

Created by: Nil96 at: 7/22/2008 11:46 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

7/22/2008 11:46 AM	Rate (0)
Nil96 Posts: 325 Rating: (14)	Hi, We are exucuting a project, where in all the motors are swicted On & Off thru Simocodes. The Simocodes used are Pro-C and these are interfaced to PCS7 H System via Y-Link. The simocodes are woking fine as long as the device specific parameter "Current mesurement" is set to "no current measuring". The moment we set the "current measurement" to "2.4 to 24A", the bus LED blinks on the Simocode. Actual CT used along with Simocode is also 2.4 to 24A. Can any one plz let us know which are the other parameters to be set if current measurement is made active. Cheers Nil
Nil96 Posts: 325 Rating: (14)
Suggestion To thank

7/23/2008 4:31 PM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 11/14/2024 Posts: 4113 Rating: (195)	closedcause question posted twice. The second thread with the subject Simocode Pro C and PCS7 Interfaceis published within the conference Process Control Systems SIMATIC PCS 7. Best regards CS Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on