Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

SIMOCODE TIMING

Created by: Oz-Ha at: 5/20/2008 1:55 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

5/20/2008 1:55 PM	Rate (0)
Oz-Ha Posts: 9 Rating: (0)	Hi! How to setDate & Timing in SIMOCODE PRO V. Thanks
Oz-Ha Posts: 9 Rating: (0)
Suggestion To thank Quote Answer

5/22/2008 4:52 AM	Rate (0)
Amy Regular Member Joined: 4/21/2008 Last visit: 3/13/2024 Posts: 12 Rating: (2)	Hi Oz-Ha you can not set date and time for SIMOCODE directly, but if SIMOCODE Pro as a DP slave in S7-400 (as master)system , you can use the time Synchronization function(in the DP interface properties), in this case you can get some information with date&time via DPV1 function.

Suggestion To thank Quote Answer

5/20/2014 6:28 PM	Rate (0)
@nkur Posts: 202 Rating: (16)	Hi There In case of SIMOCODE PRO V & C one cannot set date & time.
@nkur Posts: 202 Rating: (16)
Suggestion To thank Quote Answer

5/20/2014 7:20 PM	Rate (0)
R J Bronze Member Joined: 10/20/2009 Last visit: 4/3/2017 Posts: 215 Rating: (12)	Hi, Please download "Programming and Operating Manual of SIMOCODE" and refer chapter 3.4 to know about time synchronisation. I am not able to attach it beacause 6.1MB size, but you can download it from google.com
	Regards, R J =================================== Your ‘I CAN’ is more important than your ‘I.Q’
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on