Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

SINAMICS CU320, system time

Created by: OPeter at: 10/22/2008 4:59 PM (16 Replies)

Rating (0)

Thanks 0

Result pages:: |; 1 | 2; |

17 Entries

Entries per page: 10 | all

11/20/2008 8:26 PM	Rate (0)
ms... Posts: 26 Rating: (0)	Christoph, Thank you, that seems to work. The Sinamics fault log time is now the correct time of day, and the date is the number of days since 1970.I have some questions, but before that I am wondering about the date format. Is it possible for the date to be displayed in a normal day/month/year format instead of number of days? Thanks, ms...
ms... Posts: 26 Rating: (0)
Suggestion To thank Quote Answer

11/24/2008 5:02 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 11/14/2024 Posts: 22452 Rating: (3030)	Hello, no the format is only number of days. The time in SINAMICS is only a counter because the SINAMICS HW has no owen RTC modul. Regards Christoph

Suggestion To thank Quote Answer

11/24/2008 8:53 AM	Rate (0)
mumbles Posts: 160 Rating: (16)	Refer to the List Manual for the Sinamics Drive. Here you will find a description for the parameter in question.
mumbles Posts: 160 Rating: (16)
Suggestion To thank Quote Answer

12/1/2008 5:05 PM	Rate (0)
ms... Posts: 26 Rating: (0)	Christoph, If you have number of days since 01Jan1970 then I don't think you need an RTC to calculate the current date. This feature would help quite a bit in diagnosing a problem, especially when looking at the alarm history. ms...
ms... Posts: 26 Rating: (0)
Suggestion To thank Quote Answer

12/15/2008 1:07 PM	Rate (0)
ms... Posts: 26 Rating: (0)	I just returned from a Simotion Programming class. In that class, we usedScout V4.1.2. With this latest version, and the parameter settings mentioned above by Christoph, the displayed time stamp for Sinamics faults is now a normal date and time, instead of the number of days. ms...
ms... Posts: 26 Rating: (0)
Suggestion To thank Quote Answer

7/28/2018 6:13 AM	Rate (0)
Raman_501733 Posts: 2 Rating: (0)	ChristophD Hello, parameters in Sinamics are p3100 and p3101.1/p3101.0. p3100 to activate the UTC mode and p3101.1/.0 for the time values in UTC format from PLC. If i have a SIMOTION PLC above then i use the functions _writedriveparameter and _writedriivemultiparameter. With a SIMATIC PLC above i use the SFC's 58 and 59 Regards Christoph unknown user Dear Christoph, Can i get bit detail more about this "With a SIMATIC PLC above i use the SFC's 58 and 59 " How can i do this use SIMATIC. Please advise . Thank you Raman
Raman_501733 Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

7/28/2018 11:12 PM	Rate (0)
zako_ Gold Member Joined: 5/22/2012 Last visit: 3/24/2022 Posts: 895 Rating: (67)	I would use the LAcycCom in TIA Portal: https://support.industry.siemens.com/cs/de/en/view/109479553

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_S

Follow us on