Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

SPB label in STEP 5

Created by: Jose Antonio at: 1/31/2014 1:21 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

1/31/2014 1:21 PM	Rate (0)
Jose Antonio Posts: 16 Rating: (0)	Hi evryone! I don't know how it is configured an SPB instruction. Exactly, I don't know how to put a label in Step 5 I have to do the nex code :U E21.4 :SPB =sincronizar :BEA sincronizar: L MW250 :T MW248 :L MW248 :L +KF2 :ADD_I :T MW248 :*** Well, I don't know ho to put the label "sincronizar". how does is it putted? Thanks
Jose Antonio Posts: 16 Rating: (0)
Suggestion To thank Quote Answer

1/31/2014 1:35 PM	Rate (0)
sps-concept Gold Member Joined: 4/5/2006 Last visit: 8/13/2023 Posts: 642 Rating: (131)	Hello, only 4 sign for the label, first sign not a number. Use the arrow keys and go to left. And you can use the label only in a FB! Regards André Räppel --------------------------------------------------------------------------------- www.raeppel.de work faster withinnovative PLC-Tools Attachment label.jpg (209 Downloads)
	Last edited by: sps-concept at: 1/31/2014 1:37 PM
Suggestion To thank Quote Answer

1/31/2014 1:46 PM	Rate (0)
Jose Antonio Posts: 16 Rating: (0)	Thanks sps-concept. The problem was I tried to do it in a PB module... Thanks Best regards
Jose Antonio Posts: 16 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on