Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Starter v4.4, how to install the HELP

Created by: azzy9 at: 10/23/2014 7:55 AM (22 Replies)

Rating (2)

Thanks 6

Result pages:: |; 1 | 2 | 3; |

23 Entries

Entries per page: 10 | 20 | all

10/23/2014 7:55 AM	Rate (0)
azzy9 Posts: 93 Rating: (0)	Chirstoph, There is another issuse. I have downloaded HELP for Starter v4.4 but ow can i install it? There is a folder SSP_HELP in which there is a Help for Sinamics I want to install it. Regards, Asad
azzy9 Posts: 93 Rating: (0)	Last edited by: Min_Moderator at: 10/23/2014 8:56 AM New subject after splitting from /tf/WW/en/Posts/116408#top
Suggestion To thank Quote Answer

10/23/2014 7:58 AM	Rate (1)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 3/20/2023 Posts: 21352 Rating: (2818)	Hello, The SSP Help can be installed with the setup.exe in the SSP Subdirectory. The Starter Help can only be installed with the STARTER Setup. If the Starter first installed without the help the download the complete starter setup again included the helpfiles and start the setup again. In the setup then you can select that only the help should be installed. regards Christoph
	Last edited by: Min_Moderator at: 10/23/2014 9:00 AM Last edited by: ChristophD at: 10/23/2014 8:05 AM
Suggestion To thank Quote Answer

10/23/2014 8:28 AM	Rate (0)
azzy9 Posts: 93 Rating: (0)	I have downloaded STARTER v4.4 in Volumes from the website of siemens. Where I can find complete version?
azzy9 Posts: 93 Rating: (0)
Suggestion To thank Quote Answer

10/23/2014 8:37 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 3/20/2023 Posts: 21352 Rating: (2818)	Hello, all Volumes from here! Then you must unpack all volumes in the same directory and then install. Regards Christoph

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users azzy9

10/23/2014 10:40 AM	Rate (0)
azzy9 Posts: 93 Rating: (0)	Im still not able to install HELP. I have extracted the Help package in Starter Software Program under the Folder SSP_Help. When I run software it it shows HELP but not install its package. See the Attachment. Attachment help.JPG (1990 Downloads)
azzy9 Posts: 93 Rating: (0)
Suggestion To thank Quote Answer

10/26/2014 12:19 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 3/20/2023 Posts: 21352 Rating: (2818)	Hello, then start the setup.exe directly from the SSP_Help Directory. Regards Christoph

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Hasse123

2/6/2015 11:56 PM	Rate (0)
Toombs Posts: 91 Rating: (4)	ChristophD Hello, then start the setup.exe directly from the SSP_Help Directory. Regards Christoph I can't get the help to install either. When I run the setup files for the Help, it gives error message saying these files can't be installed because Starter Help hasn't been installed. Install Starter Help first. So then to install Starter help, it says to run the original Setup.exe again. However, the Starter exe (the 1st download among the links) is the Starter program without the help. Why isn't there just a version that includes the help? Most of the optional files that I try to install fail with a "current path too long" error when I try to run their setup.exe files. This doesn't make sense because the file name is on the root directory and is at most 100 characters.
Toombs Posts: 91 Rating: (4)
Suggestion To thank Quote Answer

2/7/2015 12:19 AM	Rate (0)
Toombs Posts: 91 Rating: (4)	Toombs ChristophD Hello, then start the setup.exe directly from the SSP_Help Directory. Regards Christoph I can't get the help to install either. When I run the setup files for the Help, it gives error message saying these files can't be installed because Starter Help hasn't been installed. Install Starter Help first. So then to install Starter help, it says to run the original Setup.exe again. However, the Starter exe (the 1st download among the links) is the Starter program without the help. Why isn't there just a version that includes the help? Most of the optional files that I try to install fail with a "current path too long" error when I try to run their setup.exe files. This doesn't make sense because the file name is on the root directory and is at most 100 characters. Oh I think I see what I'm doing wrong. It's the unpacking of everything into one directory according to a specific format. From Siemen's site: Procedure to install STARTER V4.4: Download the 2 or 3 or 4 attached ZIP files (depending on the selected download version) Unpack the ZIP files into a shared target directory on your hard disk. Please ensure that there are no spaces in the entire path name of this target directory. After unpacking, the shared directory must appear as follows (shown for the "complete" version): \...\GemeinsamesVerzeichnis\01_Readme\ \...\GemeinsamesVerzeichnis\CD_1\ \...\GemeinsamesVerzeichnis\CD_2\ \...\GemeinsamesVerzeichnis\CD_3\ \...\GemeinsamesVerzeichnis\SSP_BT\ \...\GemeinsamesVerzeichnis\SSP_DCM\ \...\GemeinsamesVerzeichnis\SSP_FAMILY\ \...\GemeinsamesVerzeichnis\SSP_G110_G120\ \...\GemeinsamesVerzeichnis\SSP_HELP\ \...\GemeinsamesVerzeichnis\SSP_MV\ \...\GemeinsamesVerzeichnis\SSP_SIMOTION_INTEGRATED\ \...\GemeinsamesVerzeichnis\SSP_SINUMERIK_INTEGRATED\ \...\GemeinsamesVerzeichnis\Unsupported Tools\ Start the STARTER setup program by calling it from /CD_1/SETUP.EXE.
Toombs Posts: 91 Rating: (4)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users AvenLopez

2/19/2015 7:36 AM	Rate (0)
HuzaifaQureshi Posts: 51 Rating: (1)	http://support.automation.siemens.com/WW/view/en/26233208 I can not access this page, when I click it says Server not available. Please guide Regards Huzaifa
HuzaifaQureshi Posts: 51 Rating: (1)
Suggestion To thank Quote Answer

2/19/2015 7:52 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 3/20/2023 Posts: 21352 Rating: (2818)	try it with this Link

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on