Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Taking the printout of the weight from siwarex ms

Created by: rick209 at: 7/9/2010 8:39 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

7/9/2010 8:39 AM	Rate (0)
rick209 Posts: 33 Rating: (0)	Dear Suwarexi Hi once again,my problem is that i using a siwarex ms with 200 cpu ,no hmi or tp etc,my client requirement is that he want print out of the weight after every batch,is three any way that i can take the print out if the actual weight from siwarex if not then what other tools will be required to achieve the same. Looking forward for your support. Thanks&regards
rick209 Posts: 33 Rating: (0)
Suggestion To thank Quote Answer

7/9/2010 11:17 AM	Rate (0)
ABenno Posts: 206 Rating: (22)	Hello Rick, Siwarexi is at the moment not available, so I willanswer for him. A direct print out with the Siwarex MS is not possible. I could imagine that it would be possible to use the serial port of the CPU to connect a serial printer. But im not a S7-200 specialist, may be a ask them or have a look to the FAQ´s for that. Regards ABenno
ABenno Posts: 206 Rating: (22)	Last edited by: ABenno at: 7/9/2010 1:05 PM
Suggestion To thank Quote Answer

7/14/2010 11:16 AM	Rate (0)
rick209 Posts: 33 Rating: (0)	Dear Abenno Thanx for your valuable information,i will look into the 200 manuals gor more information' Regards Rick
rick209 Posts: 33 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on