Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Teleperm and s5

Created by: www.opauto.no at: 5/7/2014 1:35 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

5/7/2014 1:35 PM	Rate (0)
www.opauto.no Posts: 32 Rating: (0)	Hi! I have a s5 plc which is communicating with a Teleperm PLC. I want to upgrade the S5-plc to a S7 which supports CFC. Do you know which ingerface The new s7 node and the teleperm node can use for communication? Thanks! ØP
www.opauto.no Posts: 32 Rating: (0)
Suggestion To thank Quote Answer

5/12/2014 9:24 PM	Rate (0)
mjcaleb Posts: 9 Rating: (0)	In existing configuration what was communication between S5 to Teleperm? hardwire?
mjcaleb Posts: 9 Rating: (0)
Suggestion To thank Quote Answer

5/13/2014 10:56 AM	Rate (0)
www.opauto.no Posts: 32 Rating: (0)	Due to different operators on the different 2 system we now have a Teleperm Fieldbus communicating with the Teleperm PLC and the step 5 node. This card is used in our step 5 hardware config to coms to Teleperm 6DS13268AA Ebay link http://www.ebay.com/itm/6DS1326-8AA-SIEMENS-Teleperm-6DS13268AA-COMMUNICATION-CARD-/320968094593?pt=SPS_Bus_Logiksysteme&hash=item4abb307381 Thanks !
www.opauto.no Posts: 32 Rating: (0)	Last edited by: www.opauto.no at: 5/13/2014 11:04 AM
Suggestion To thank Quote Answer

6/15/2014 11:38 AM	Rate (0)
YuFedorovych Advanced Member Joined: 9/10/2013 Last visit: 11/7/2024 Posts: 2 Rating: (0)	You may use gateway GT104CS. We used it to share data between TelepermM and PCS7 systems.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on