Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

the alarm history

Created by: AutoGen_369883 at: 5/2/2018 11:16 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

5/2/2018 11:16 AM	Rate (0)
AutoGen_369883 Advanced Member Joined: 8/22/2013 Last visit: 6/5/2021 Posts: 62 Rating: (0)	Dear sir, Now i have a problem,in the S120 cu and drive unit,when i san the alarm history.It is shown in the format d:hour:minute:second. It is difficult for me to know what happen on which time. Pleas see the attachment. Best Regards. Attachment alarm history.png (59 Downloads)

Suggestion To thank Quote Answer

5/2/2018 11:25 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 6/1/2023 Posts: 21506 Rating: (2854)	Hello, to see the time format in year:month:day you must set the clocl in the UDT Modus (p3100). Regards Christoph

Suggestion To thank Quote Answer

5/3/2018 6:04 AM	Rate (0)
AutoGen_369883 Advanced Member Joined: 8/22/2013 Last visit: 6/5/2021 Posts: 62 Rating: (0)	DearChristophD , Thank you very much. But how can i coordinate the s120 udt time with the wincc time. Best Regards.

Suggestion To thank Quote Answer

5/3/2018 6:24 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 6/1/2023 Posts: 21506 Rating: (2854)	Hello, this depends on the config you use. You can synchronize the Sinamics Time with the PLC Time or if you have CU320-2 PN you can use NTP. For details you must give mir informations about the Devices you use and the Versions which are used. Regards Christoph

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_S

Follow us on