Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

TIA Portal v11

Created by: radekk at: 9/28/2010 1:19 PM (12 Replies)

Rating (1)

Thanks 5

Result pages:: |; 1 | 2; |

13 Entries

Entries per page: 10 | all

9/28/2010 1:19 PM	Rate (0)
radekk Bronze Member Joined: 3/22/2010 Last visit: 5/29/2023 Posts: 76 Rating: (0)	Hi Guys, My customer has a question about TIA Portal v11. 1) When will this be released? 2)What will be itsapproximated price - similar to v10.5? 3)Will it be avaliable in starter packages? Do You know any of this? Thanks in advance. Best greets, Radek

Suggestion To thank Quote Answer

9/28/2010 1:56 PM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 4/12/2023 Posts: 10221 Rating: (1176)	Hello, For sure for the moment we need a fortune teller to answer of these questions. My "info": End of year (let's say spring of 2011) TIA Portal Step7 Basic V11 will come, it integrates full flexible and supports CPU 1200 V2. TIA Portal will "keep" a 32 Bit Software. Best regards, Hristo Mihalev

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users radekk

9/28/2010 10:45 PM	Rate (0)
Tomy Master Gold Member Joined: 5/4/2009 Last visit: 5/17/2023 Posts: 911 Rating: (40)	Dear UMENCHO... What do you mean by "V2" of S7-1200? Regards. Tomy.
	Aim Higher
Suggestion To thank Quote Answer

9/29/2010 11:52 AM	Rate (1)
TomDeWou Platinum Expert Joined: 11/15/2006 Last visit: 5/7/2021 Posts: 1319 Rating: (167)	V2 is the next Firmware version, I assume.
	Have Fun! TomDeWou
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Tomy Master

9/29/2010 2:21 PM	Rate (0)
fritz Diamond Member Joined: 10/7/2005 Last visit: 5/30/2023 Posts: 2966 Rating: (1025)	Hello radekk if Siemens own countdown (see HERE) is anything to go by you can expect the release of TIA Portal V11 by the end of November 2010. If all goes to plan, you can also expect that it will be useable for 1200's, 300's and 400's and all HMI Panels. Pricing will depend on the "power" of the license that you need (e g. "Basic" license for 1200's and Basic Panels etc.). I hope this helps
	Cheers fritz The advice and opinion given in this thread is that of the author and does not necessarily reflect the views of I S Systems Pty Limited. To find out how I S Systems can help you with your automation needs please visit www.issystems.com.au.
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users radekk

11/20/2010 7:05 AM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 4/12/2023 Posts: 10221 Rating: (1176)	The new TIA Portal V11 contains the following programs: - Step 7 for PLC 300,400 and for future STL/FBD/LAD/SCL/GRAPH - Step 7 Basic for the 1200 V1 and V2 FBD/LAD and SCL - "WinCC flexible" small to advanced -> new name "WinCC" - WinCC V7.1 -> new name "WinCC Professional" Best regards, Hristo Mihalev
	Last edited by: CS Moderator at: 11/29/2010 2:04 PM
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Testermax

3/9/2011 5:02 PM	Rate (0)
tokzu23 Posts: 17 Rating: (3)	UMENCHO The new TIA Portal V11 contains the following programs: - Step 7 for PLC 300,400 and for future STL/FBD/LAD/SCL/GRAPH - Step 7 Basic for the 1200 V1 and V2 FBD/LAD and SCL - "WinCC flexible" small to advanced -> new name "WinCC" - WinCC V7.1 -> new name "WinCC Professional" Best regards, Hristo Mihalev Just to be clear: everything that Umencho said is totally true, but i will clearify just software names "- TIA Portal Step 7 ProfetionalV11for PLC 1200,300,400 and for future STL/FBD/LAD/SCL/GRAPH/AWL also for Panel HMI, all palet - TIA Portal Step 7 Basic V11 for the 1200 Firmware V1 and Firmware V2 and Basic Panel KTP; FBD/LAD and SCL "
tokzu23 Posts: 17 Rating: (3)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users UMENCHO

4/21/2011 3:52 PM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 4/12/2023 Posts: 10221 Rating: (1176)	TIA Portal Innovation Tour 2011 (German pdf) 1_TIA_Portal_V11_Einfuehrung 2_TIA_Portal_V11_Einstieg_Erstes Projekt 3_TIA_Portal_V11_HMI 4_TIA_Portal_V11_Bibliotheken 5_TIA_Portal_V11_Geräteübersicht und Migration 6_TIA_Portal_V11_Safety 7_TIA_Portal_V11_SCL http://www.siemens.de/industry/automati ... ehrung.pdf http://www.siemens.de/industry/automati ... rojekt.pdf http://www.siemens.de/industry/automati ... 11_HMI.pdf http://www.siemens.de/industry/automati ... theken.pdf http://www.siemens.de/industry/automati ... ration.pdf http://www.siemens.de/industry/automati ... Safety.pdf http://www.siemens.de/industry/automati ... 11_SCL.pdf S7-31T CPUs are not supported yet. S7-41H CPUs are not supported yet. WinCC Redundanz / WinCC-Client mit Projekt / WinCC CAS are not supported yet. AS-Interface, PROFINET I-Device (onboard), SIWAREX are not supported yet.

Suggestion To thank Quote Answer

4/22/2011 2:02 PM	Rate (0)
fritz Diamond Member Joined: 10/7/2005 Last visit: 5/30/2023 Posts: 2966 Rating: (1025)	Looks like the Siemens Easter bunny laid a BIG Easter egg this year: Delivery release SIMATIC STEP 7 Professional V11
	Cheers fritz The advice and opinion given in this thread is that of the author and does not necessarily reflect the views of I S Systems Pty Limited. To find out how I S Systems can help you with your automation needs please visit www.issystems.com.au.
Suggestion To thank Quote Answer

4/22/2011 7:52 PM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 4/12/2023 Posts: 10221 Rating: (1176)	Delivery release TIA Poprtal V11 ~May The delivery release of WinCC Basic, WinCC Comfort and WinCC Advanced, and related upgrades and power packs will follow in a special delivery release on 05/02/2011. Service Packs for TIA Poprtal V11: SP1 June - fix some first bugs SP2 Septembr - add SCL for S7-1200 Seems will be a long story...

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on