Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

TP070 question

Created by: fish at: 6/25/2008 12:00 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

6/25/2008 12:00 PM	Rate (0)
fish Advanced Member Joined: 9/28/2007 Last visit: 2/10/2022 Posts: 47 Rating: (0)	Dear All I have a TP070 project. How I want to see the alarm information of TP070 ? If I want to config alarm. How I want to plan ?

Suggestion To thank Quote Answer

6/26/2008 10:19 AM	Rate (0)
Helmut_13 Posts: 2930 Rating: (432)	Hi, as I remember the TP070 do not have the Alarm function. Create a picture for the Alarm and change to this picture in case of an alarm. I hope this helps. Helmut
Helmut_13 Posts: 2930 Rating: (432)
Suggestion To thank Quote Answer

6/26/2008 11:05 AM	Rate (0)
The Body Gold Member Joined: 5/13/2008 Last visit: 12/18/2019 Posts: 836 Rating: (71)	Here you can find a standard project what serves as a guide for setting up a message system and the time & date synchronization: http://support.automation.siemens.com/WW/view/en/7193740
	mfG / Best regards Roland
Suggestion To thank Quote Answer

6/27/2008 8:12 AM	Rate (0)
Helmut_13 Posts: 2930 Rating: (432)	Hi, if you have a look to the help of the TP-Designer SW then you can't find any note aboute Alarms. So I think a TP070 do not have this feature. Sollution 1: Create a screen with your Alarm messages and change to the Alarm screen in case of an error. Sollution 2: Create a single Alarm screen with an ASCII output field and in the PLC program copy your differnet message texts to the ASCII output field (if the TP070 supports ASCII output fields) in case of errors. I hope this helps. Helmut
Helmut_13 Posts: 2930 Rating: (432)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on