Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Transfer RT Flexible 2008 SP3 project between two Visualization PC

Created by: Fadi Jaber at: 2/26/2024 3:04 PM (6 Replies)

Rating (0)

Thanks 0

7 Entries

2/26/2024 3:04 PM	Rate (0)
Fadi Jaber Joined: 1/28/2024 Last visit: 5/9/2024 Posts: 4 Rating: (0)	Dear all, I have to transfer a RT Flexible 2008 RT project from windows 7 PC (Visualization PC) into another Server (Visualization). I don't have the original configuration PC. Could you please help me to do that task. Thank you.

Suggestion To thank Quote Answer

2/26/2024 3:52 PM	Rate (0)
Swarley92 Experienced Member Joined: 8/12/2021 Last visit: 11/7/2024 Posts: 331 Rating: (31)	Hi! There is an FAQ where you can find the steps. Check this link
	If this Information really helps, you could use the Rate function Best regards Swarley92
Suggestion To thank Quote Answer

2/26/2024 5:39 PM	Rate (0)
Fadi Jaber Joined: 1/28/2024 Last visit: 5/9/2024 Posts: 4 Rating: (0)	Thank you Swarley, Actually I have already checked that Link. The problem is that I don't have the configuration PC. I have an old visualization PC and I want to transfer the project to another new PC (Server). I tried to copy the .FWX file and fix the directories in the RT loader but that didn't work!

Suggestion To thank Quote Answer

2/27/2024 9:09 AM	Rate (0)
Prof. Frink Platinum Expert Joined: 7/5/2013 Last visit: 11/7/2024 Posts: 3119 Rating: (515)	Hello Fadi, Fadi Jaber [..] I tried to copy the .FWX file and fix the directories in the RT loader but that didn't work! aren't there some more files resp sub-directories in the same folder where you found the fwx-file? What about starting the fwx-file directly by double-clicking it in the File Explorer? Regards, Frink
	Pi is exactly three! All you have to do is think of things which people need but which don’t exist yet.
Suggestion To thank Quote Answer

2/27/2024 9:39 AM	Rate (0)
Fadi Jaber Joined: 1/28/2024 Last visit: 5/9/2024 Posts: 4 Rating: (0)	Actually I have the original project that had been developed by the Configuration PC! and all sub directory files are included. But I don't have the configuration PC!

Suggestion To thank Quote Answer

2/27/2024 9:39 AM	Rate (0)
Fadi Jaber Joined: 1/28/2024 Last visit: 5/9/2024 Posts: 4 Rating: (0)	Actually I have the original project that had been developed by the Configuration PC! and all sub directory files are included. But I don't have the configuration PC! Prof. Frink Hello Fadi, Fadi Jaber [..] I tried to copy the .FWX file and fix the directories in the RT loader but that didn't work! aren't there some more files resp sub-directories in the same folder where you found the fwx-file? What about starting the fwx-file directly by double-clicking it in the File Explorer? Regards, Frink

Suggestion To thank Quote Answer

3/6/2024 11:53 AM	Rate (0)
Murof Platinum Expert Joined: 8/3/2009 Last visit: 11/8/2024 Posts: 14127 Rating: (1769)	Hello Fadi Jaber you can only read out the folder where ther Runtime files are stored in the Runtime loader settings on the Runtime PC. But If you use logs or recipeies in the this project then there are also directories wherre these data is stored. this paths you only can see in the engineering. (you could download WinCC flexible Engineering and run in Trail mode to check this) Also you are writing your new RT PC is a Server... does it have a Server OS ? its because WinCC flexible is not released for a Server OS only for desktop OS Bye Murof
	If this Information really helps, you could use the Rate function
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on