Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Use same project for different Panels

Created by: Chulien at: 9/15/2014 11:55 AM (12 Replies)

Rating (2)

Thanks 5

Result pages:: |; 1 | 2; |

13 Entries

Entries per page: 10 | all

9/15/2014 11:55 AM	Rate (0)
Chulien Posts: 162 Rating: (8)	Hi, I would like to know if there's a procedure to work with several panels using the same project. In my case, I've a CPU 319 linked with 3 TP1500 Basic and I'm working with TIA v13. I would like to have only one project to avoid to make modifications 3 times every time. Is there's a way to do that ? Best Regards, Chulien
Chulien Posts: 162 Rating: (8)
Suggestion To thank Quote Answer

9/16/2014 7:16 AM	Rate (0)
K!ke Posts: 1299 Rating: (135)	Hello http://support.automation.siemens.com/WW/view/en/68373729 see chapter 4.2 K!ke
K!ke Posts: 1299 Rating: (135)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users rdoliveira

9/16/2014 9:25 AM	Rate (0)
Chulien Posts: 162 Rating: (8)	Thanks for the answer but it looks that it has nothing to do with my question. Am I reading wrongly or wrong link ?
Chulien Posts: 162 Rating: (8)
Suggestion To thank Quote Answer

9/16/2014 3:27 PM	Rate (0)
SiforumUser Experienced Member Joined: 1/30/2007 Last visit: 10/18/2023 Posts: 85 Rating: (5)	i think what the link is saying is that you can have 1 HMI in your project and then use the memory card to transfer that same project to your other 2 panels.

Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users abosama K!ke

9/16/2014 10:24 PM	Rate (0)
rdoliveira Gold Expert Joined: 4/26/2012 Last visit: 11/27/2023 Posts: 1424 Rating: (141)	But how is the connection? Profibus or Ethernet for example. Because the node or the ip you will have to change anyway. Or other HMIs are on different networks with the same address? I do so I use only one and change my IP to other HMIs.
	"Always make a backup before and check the best time before testing." Obrigado.
Suggestion To thank Quote Answer

9/16/2014 10:25 PM	Rate (0)
rdoliveira Gold Expert Joined: 4/26/2012 Last visit: 11/27/2023 Posts: 1424 Rating: (141)	Another alternative is to use the USB flash drive with a backup and restore and the control panel.
	"Always make a backup before and check the best time before testing." Obrigado.
Suggestion To thank Quote Answer

9/17/2014 9:15 AM	Rate (0)
Chulien Posts: 162 Rating: (8)	Yes. I did it that way and that works fine. The only thing you need to do is in the device configuration check "Specify the adress directly on the device" and use the functionnality "Extended Download" of TIA Portal to specify the IP of the panel you want to connect to.
Chulien Posts: 162 Rating: (8)
Suggestion To thank Quote Answer

9/17/2014 1:34 PM	Rate (0)
rdoliveira Gold Expert Joined: 4/26/2012 Last visit: 11/27/2023 Posts: 1424 Rating: (141)	Chulien Yes. I did it that way and that works fine. The only thing you need to do is in the device configuration check "Specify the adress directly on the device" and use the functionnality "Extended Download" of TIA Portal to specify the IP of the panel you want to connect to. Could you describe the way, where is the "Extended Download" of TIA Portal "?
	Last edited by: rdoliveira at: 9/17/2014 1:34 PM "Always make a backup before and check the best time before testing." Obrigado.
Suggestion To thank Quote Answer

9/17/2014 1:38 PM	Rate (0)
Chulien Posts: 162 Rating: (8)	This is in the Top banner under the Online section. You've "Extended download to device". Once you click on it you've got up asking you for an IP address. If you make a simple Download it will just use the previous IP that you configured like this you can download to several IPs at the same time.
Chulien Posts: 162 Rating: (8)
Suggestion To thank Quote Answer

9/17/2014 9:59 PM	Rate (0)
rdoliveira Gold Expert Joined: 4/26/2012 Last visit: 11/27/2023 Posts: 1424 Rating: (141)	could you post a picture?
	"Always make a backup before and check the best time before testing." Obrigado.
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Installation Options General

Follow us on