Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

using some screens to show some timers

Created by: k-oz at: 12/23/2011 4:19 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

12/23/2011 4:19 PM	Rate (0)
k-oz Posts: 20 Rating: (1)	Hi all... i have two questions... [schnippschnapp] 2- I am using some screens to show some timers, so the user can modify the time in some procces but there is a problem...the time in the fields in the screen has to be set in milliseconds, and i need it in minutes... the time has been declared in a OB has a time, and i has set the initial time as a minutes, but when somebody set the time in the hmi, it appears automatically in milliseconds... is there a way to set the time in minutes??? thaks...
k-oz Posts: 20 Rating: (1)	Last edited by: O_Moderator at: 12/25/2011 6:51 PM new subject after splitting from /tf/WW/en/Posts/67209#top
Suggestion To thank Quote Answer

12/26/2011 10:11 AM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 5/26/2023 Posts: 4184 Rating: (1342)	Hi, you can use the properties "linear scalling" of the Tag on HMI. relationship to seconds: PLC = 0 -> HMI = 0 PLC =1 000 -> HMI = 1 relationship to minutes: PLC = 0 -> HMI = 0 PLC = 60 000 -> HMI = 1 relationship to hours: PLC = 0 -> HMI = 0 PLC =3 600000 -> HMI = 1
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

1/5/2012 7:20 PM	Rate (0)
k-oz Posts: 20 Rating: (1)	Thanks a lot!!! finally is working correctly...
k-oz Posts: 20 Rating: (1)
Suggestion To thank Quote Answer

1/6/2012 10:19 AM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 5/26/2023 Posts: 4184 Rating: (1342)	It is a pleasure to help you
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Installation Options General

Follow us on