Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

want to know "how power enable and Drive enable in simotion D"

Created by: walian at: 5/30/2019 7:26 AM (14 Replies)

Rating (1)

Thanks 0

Result pages:: |; 1 | 2; |

15 Entries

Entries per page: 10 | all

5/30/2019 7:26 AM	Rate (0)
walian Posts: 22 Rating: (0)	Hi every body, we use simotion D445 in our comany. now some of its drives are disable, thay are power disabe, OFF2 ,OFF3, drive enable and power eabe are disable. I want to know for commissiniong them, which parameters should be set, or what should I do? thank you
walian Posts: 22 Rating: (0)
Suggestion To thank Quote Answer

5/30/2019 7:52 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 11/14/2024 Posts: 22452 Rating: (3030)	Hello, have the drives running without problems before? Is there any red LED ON on the Motormodules or on the SIMOTION D445? Do you have the Scout project for the machine? Can you telle the exact version of D445 (Ordernumber; FW Version) and the Scout you use? Regards Christoph

Suggestion To thank Quote Answer

5/30/2019 8:12 AM	Rate (0)
walian Posts: 22 Rating: (0)	Hello. before we used it. but during the downloading machune was stopped. and we took off the CFcard and delete its data and load it again. now some its drives are disable. like no running. the D445-2 DP/PN 6AU1445-2AD00-0AA0. simotion scout 4.4.0.6 .HF6. we have no alarm. we have the project of the machine. thank you
walian Posts: 22 Rating: (0)	Last edited by: walian at: 05/30/2019 08:19:09
Suggestion To thank Quote Answer

5/30/2019 8:14 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 11/14/2024 Posts: 22452 Rating: (3030)	Hi, how are the LED States on the D445, the Infeed and the motor Modules? Regards Christoph

Suggestion To thank Quote Answer

5/30/2019 8:23 AM	Rate (0)
walian Posts: 22 Rating: (0)	thay are ok. no alarm. thay are green. the modules are run too. i want to kniw how can I enable them?
walian Posts: 22 Rating: (0)	Last edited by: walian at: 05/30/2019 08:27:38 Last edited by: walian at: 05/30/2019 08:30:09
Suggestion To thank Quote Answer

5/30/2019 8:28 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 11/14/2024 Posts: 22452 Rating: (3030)	Hello, ok , can you go online and check the drives with the control panel? Do the drives move with the control panel? Are the drives controlled from SIMOTION Technological Object axis? If you are online there shold be a dateilwindos "Diagnostics" can you make a online screen from it? Regards Christoph

Suggestion To thank Quote Answer

5/30/2019 9:37 AM	Rate (0)
walian Posts: 22 Rating: (0)	IT can not be work by control pannel. I mean we can not run it in control pannel
walian Posts: 22 Rating: (0)
Suggestion To thank Quote Answer

5/30/2019 9:40 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 11/14/2024 Posts: 22452 Rating: (3030)	any screen? any errormessage? if you try to enable with control panel which message you get? how are r46 if you enable in the control panel?

Suggestion To thank Quote Answer

5/30/2019 12:16 PM	Rate (0)
walian Posts: 22 Rating: (0)	I think find the problem, I checked the CF card. its files are not compelet.now if I have any back up of its files, how can commissioning CF? we have another machine like this, with the same program, can I use itS CFs files on another machine? regards
walian Posts: 22 Rating: (0)
Suggestion To thank Quote Answer

5/30/2019 12:58 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 11/14/2024 Posts: 22452 Rating: (3030)	Hello, which files you mean? Yes you can use the copy of CF from the other machine if it is identical. note that all data from the other machine then doubled. this can cause some network problems if they are on the same network with the same IP! Regards Christoph

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on