Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

What DBXs in the PLC are designated to $A_IN[] and $A_OUT in the NC?

Created by: Luffy at: 5/12/2009 11:06 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

5/12/2009 11:06 AM	Rate (0)
Luffy Posts: 7 Rating: (0)	For example, in the NC program write like below: IF $A_IN[30] G0 G60 ......... ENDIF How can I know which DB and DBX triggers the $A_IN[30] in the PLC program? In which Siemens manual that I can find the information talking about the relationship between those fast I/Os ($A_IN and $A_OUT) and DBXs? Thanks....
Luffy Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

5/12/2009 11:18 AM	Rate (0)
RAM81 Silver Member Joined: 3/3/2008 Last visit: 10/5/2023 Posts: 333 Rating: (51)	hi luffy the $a_in[]and $a_out are vailable in DB10 for futher referene refer doc on cd and look in chapter called lists2 regards Ram

Suggestion To thank Quote Answer

5/12/2009 3:51 PM	Rate (0)
Luffy Posts: 7 Rating: (0)	I took a look at the LIST2, but there is not too much information about the relationship between $A_IN[] or $A_OUT[] link to which DBXs. Is there other more detailed information about it?
Luffy Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

5/12/2009 6:14 PM	Rate (0)
SteveA Posts: 297 Rating: (41)	Look in: SINUMERIK 840D sl/840Di sl/840D/840Di/810D Extended Functions: Digital and analog NCK I/Os (A4) HTH, SteveA
SteveA Posts: 297 Rating: (41)
Suggestion To thank Quote Answer

5/13/2009 9:47 AM	Rate (0)
Luffy Posts: 7 Rating: (0)	Thank you Steve, I get the right place.
Luffy Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on