Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

WinCC flexible SmartClient View

Created by: AlesPoljakNOJP at: 4/12/2017 4:22 PM (5 Replies)

Rating (0)

Thanks 0

6 Entries

4/12/2017 4:22 PM	Rate (0)
AlesPoljakNOJP Experienced Member Joined: 8/25/2014 Last visit: 4/19/2024 Posts: 133 Rating: (1)	Hello all. Am I right to think that I can use the SmartClient View in Wincc Flexible 2008 advanced to display an operator panels graphics on the Wincc flexible runtime? The WinCC flexible runtime 2008 is on a profinet network where a KTP 1500 basic panel is also connected. So If I enter the IP address of the panel to the input filed: Address for Smart Server will this view display the graphics od the operator panel? Doe this functionality need to be enabled on the panel? Cheers. Aleix

Suggestion To thank Quote Answer

4/13/2017 1:24 PM	Rate (0)
Prof. Frink Platinum Expert Joined: 7/5/2013 Last visit: 11/7/2024 Posts: 3119 Rating: (515)	Hello Poljo, there is a Sm@rtServer-setting in the Runtime-settings for the panel. I think a license is then necessary. Best regards, Frink
	Pi is exactly three! All you have to do is think of things which people need but which don’t exist yet.
Suggestion To thank Quote Answer

4/14/2017 9:01 AM	Rate (0)
AlesPoljakNOJP Experienced Member Joined: 8/25/2014 Last visit: 4/19/2024 Posts: 133 Rating: (1)	Hello thank you for the reply. Are these two licences correct? For the KTP 1200 basic panel :6AV2107-0CR00-0BH0 For the Runtime: 6AV6618-7AD01-3AB0 Cheers A

Suggestion To thank Quote Answer

4/18/2017 8:28 AM	Rate (0)
Prof. Frink Platinum Expert Joined: 7/5/2013 Last visit: 11/7/2024 Posts: 3119 Rating: (515)	Hi, you only need the license on the server-device. If you want to show the KTP-content in the Advanced Runtime, you need the Panel-license. If you want to show the Adv RT-content on the Panel, you need the Adv RT-license. Best regards, Frink
	Pi is exactly three! All you have to do is think of things which people need but which don’t exist yet.
Suggestion To thank Quote Answer

4/19/2017 8:23 AM	Rate (0)
AlesPoljakNOJP Experienced Member Joined: 8/25/2014 Last visit: 4/19/2024 Posts: 133 Rating: (1)	Hello. I am not sure that this is true. Because when I insert the Smart Client view in to WinCC flex Runtime, when the compilation is finished this is the result. 8:18:57.39 Compiler Info : Number of PowerTags used: 1282 08:18:57.39 Compiler Info : Required license: WinCC flexible /Sm@rtAccess for PC-RT 08:18:57.39 Compiler Info : Required license: WinCC flexible /Archives for PC-RT 08:18:57.39 Compiler Info : Required license: WinCC flexible /Audit for PC-RT 08:18:58.39 Compiler Info : Succeeded with 0 error(s), 1958 warning(s). 08:18:59.39 Compiler Info : Time stamp: 4/19/2017 8:18 AM - used 2887652 bytes 08:19:05.39 Compiler Info : Compiling finished! If I delete the smart client view in WinCC flex Runtime this is the end of the compilation. 08:20:57.89 Compiler Info : Number of PowerTags used: 1282 08:20:57.89 Compiler Info : Required license: WinCC flexible /Archives for PC-RT 08:20:57.89 Compiler Info : Required license: WinCC flexible /Audit for PC-RT 08:20:59.39 Compiler Info : Succeeded with 0 error(s), 1958 warning(s). 08:21:00.39 Compiler Info : Time stamp: 4/19/2017 8:20 AM - used 2887444 bytes Can you please suggest which licenses to order? Cheers. Aleix

Suggestion To thank Quote Answer

4/25/2017 7:04 PM	Rate (0)
The Brain Gold Member Joined: 10/19/2005 Last visit: 11/30/2020 Posts: 1611 Rating: (121)	Hey, the best are, you look to this product note https://support.industry.siemens.com/cs/ww/en/view/99457747 There you will find a ordering data => WinCC flexible /Archives for PC-RT => 6AV6618-7ED01-3AB0 => WinCC flexible /Audit for PC-RT => 6AV6618-7HD01-3AB0

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on