Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

WinCC license missing POPUP message

Created by: VAES at: 2/26/2014 6:59 PM (2 Replies)

Rating (0)

Thanks 1

3 Entries

2/26/2014 6:59 PM	Rate (0)
VAES Posts: 12 Rating: (0)	Dear All, I having CPU 400H system and SCADA, In SCADA screen displaying message “SIMATIC NET Ind. Ethernet S7 REDCONNECT V7.1” License was not found (Sometimes only getting this message), after message also the system are healthy and communicating normally, Also we checked in Automation License manager SIMATIC NET Ind. Ethernet S7 REDCONNECT V7.1 license was found, What the exact reason for the above Message, is there any problem with my system or any license was missed. Can you please find attached screenshots and suggest me ASAP. Attachment screen shot.zip (192 Downloads)
VAES Posts: 12 Rating: (0)	Last edited by: VAES at: 2/26/2014 7:01 PM
Suggestion To thank Quote Answer

2/27/2014 10:35 AM	Rate (0)
Mostref Bronze Member Joined: 1/17/2010 Last visit: 11/4/2024 Posts: 77 Rating: (5)	May be the installed license is corrupted. Please check it in the automation licence manager. Best regards

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Ayman Elotaify

2/27/2014 11:04 AM	Rate (0)
Ayman Elotaify Platinum Member Joined: 5/28/2008 Last visit: 11/6/2024 Posts: 4516 Rating: (839)	Hello, To know exactly the missing licnse keys, just open your ALM software and in the upper selection field select missing license keys. Then it would view only the missing license keys. Then check if it is different with your license key or if your license key is deffected or not. Hope this helps.
	Ayman Elotaify
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on