Driver of the USB PPI multi master cable

please help me.

i need the driver of the USB PPI multi master cable with S/N:6ES7 901-3DB30-0XA0

waiting for your response

best regards

basim

------------------------------------------------------------------------------------------
Split from Connection problem between PC and PLC.

Hello,

pls I want know first, why you want that drivers, what is reason that you decide to need them? Drivers are installed with Siemens SW instalation (Step7 MicroWin, Step7 V5.X). Can you pls answer?

Edit: pls be kind to not write one question to more topics. I think that Christoph gave you right answer.

Now , I'm using operating system : win7_64bit, and installed microwin_v4_sp9 which required for 64bit operating system, and it's working good for programming on my laptop, ok,

but the problem now is that: when I connect my USB/PPI multi-master cable ( Sr: 6ES7 901-3DB30-0XA0 ) to usb port, it's appear in hardware device manager as Human Interface Device, not as a COM port !!!!!!!, so I can't identify any thing ( no port number or paud rate or any thing else ), it looks like a game kit !!!!!!

please, I want to know if this is a technical problem? and what is the solution?

or If may cable is damaged???!!!

Note that: it's LEDs lights all once when connect and then give a short flash on Tx & Rx LEDs , and then stop, no light more!!!!!!!!!!!!

Hello,

go to PG/PC interface (Icon in Microwin or Win Control Panel). Select your PPI inetrface, then click Properties. In Local Connection select USB. In PPI section put Station Address to 0. Try connect to PLC.

Edit: pls think that this adapter doesn't emulate COM port.

Edit2: to that LED flashings, after that short flashings CPU must be detected. Look at PLC->Type->Communications Window. There is better to look at connections.

I also failed configuring same USB PPI MM cable for MicroWin 4.0 SP9

Witch adaptor is to be selected?

How to configure widow PG/PC Interface ?

Hello,.

for first you must select properAccess point of the aplication.There you must select MicroWin option. Then you can select PC/PPI cable with proper interface - USB or COM port. Your screen is from MicroWin or from Control Panel of Windows? Better start MicroWin and there you can click on left side View Set PG/PC Interface icon.

Hi Everyone,

I have exactly the same problem.

Can you check please what could be wrong?

My system is Win7 64 bits.

I would like to use it with cpu 226 or cpu224.

Br

Helder Fernandes

Hello,

sry but why you not post info about version of MicroWin installed? How we can know that?

Update: asking for sure, because there were some users that have installed other versions on Win7 x64 OS.

Hi!,

Same problem for me as described from my colleagues (see attached pdf file)

STEP 7/Micro/Win V4.0.9.25

Microsystems Communications V1.0.9.25

PG/PC Setup in Control Panel is 32 bits!!!! and we are running on a 64 bits machine, could it be the problem???

Thanks,

Javier

Hello,

no, this isn't problem, problem is probably with install of MicroWin. Try sugestion on attachment, hope it helps you solve your problem.