Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

communication between S7 1200 and Wincc 2008 SP5

Created by: Noob PG at: 2/18/2020 7:09 PM (9 Replies)

Rating (1)

Thanks 4

10 Entries

2/18/2020 7:09 PM	Rate (0)
Noob PG Regular Member Joined: 6/14/2018 Last visit: 11/5/2024 Posts: 7 Rating: (0)	Hello! I need to communicate my PLC S7 1200 - CPU 1215C DC/DC/DC Firmware Version 4.1, whit Wincc RT 2008 SP5 . I had configured my project of Wincc flexible like the following post: https://support.industry.siemens.com/cs/ww/en/view/38111886 But I don't made the Data Block because I just used de I/O tags. I find the IP of my PC online in TIA Portal V13 SP2 project, I find the IP of my PLC when I execute the ping comands im my PC, but I can't to visualizate to rum my icons that monitoring the Inputs whem the wincc RT is running. In my TIA project I'm not add the wincc RT. Someone have a idea about the problem: Thanks.
	Last edited by: Jen_Moderator at: 02/19/2020 12:25:42 Optimized link.
Suggestion To thank Quote Answer

2/19/2020 8:46 AM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 11/14/2024 Posts: 8768 Rating: (1171)	Hello, Can you check the PG/PC interface? This should be S7 Online -> Ethernet card of your PC Best regards, Wizard

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Noob PG

2/19/2020 8:18 PM	Rate (0)
Noob PG Regular Member Joined: 6/14/2018 Last visit: 11/5/2024 Posts: 7 Rating: (0)	Wizard Hello, Can you check the PG/PC interface? This should be S7 Online -> Ethernet card of your PC Best regards, Wizard Hello Wizard! I try to find the PG / PC interface on my PC where Wincc Flexible is running: Start >> Search, but I didn't find it. I have only the communication settings, like the attached image. I did a test, tried to run the wincc project on my Field PG M4 and communicated with the S7 1200, the test was run without problems, confirming his advice. I will need to install some more software: Attachment setInterface.PNG (637 Downloads)

Suggestion To thank Quote Answer

2/20/2020 5:31 AM	Rate (0)
Prof. Frink Platinum Expert Joined: 7/5/2013 Last visit: 11/13/2024 Posts: 3120 Rating: (516)	Hello Hely, Hely I try to find the PG / PC interface on my PC where Wincc Flexible is running: Start >> Search, you can find the setting in the Control Panel of the WinCC flex PC. Regards, Frink
	Pi is exactly three! All you have to do is think of things which people need but which don’t exist yet.
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Noob PG

2/21/2020 3:19 PM	Rate (0)
Noob PG Regular Member Joined: 6/14/2018 Last visit: 11/5/2024 Posts: 7 Rating: (0)	Prof. Frink Hello Hely, Hely I try to find the PG / PC interface on my PC where Wincc Flexible is running: Start >> Search, you can find the setting in the Control Panel of the WinCC flex PC. Regards, Frink Hello Prof. Frink! I reinstalled RT on the machine's computer, after installation, the Set PG / PC interface appeared, I configured it as the images in the attachments, but the problem with communication continued. I thought the problem was the computer, but I changed the PC and the communication also failed. Do you have more suggestions? Regards Hely Attachment SetPG.png (613 Downloads)

Suggestion To thank Quote Answer

2/25/2020 2:42 AM	Rate (0)
Prof. Frink Platinum Expert Joined: 7/5/2013 Last visit: 11/13/2024 Posts: 3120 Rating: (516)	Hello ***, try it with "Realtek...Connection.TCPIP.1" instead of "...Auto...". Regards, Frink
	Pi is exactly three! All you have to do is think of things which people need but which don’t exist yet.
Suggestion To thank Quote Answer

2/26/2020 8:19 PM	Rate (0)
Noob PG Regular Member Joined: 6/14/2018 Last visit: 11/5/2024 Posts: 7 Rating: (0)	Prof. Frink Hello ***, try it with "Realtek...Connection.TCPIP.1" instead of "...Auto...". Regards, Frink Hello Frink, I've been trying with all the Realtek options like: - Realtek PCle GBE Famile Controller TCPIP.AUTO.2 - Realtek PCle GBE Famile Controller TCPIP.2 - Realtek PCle GBE Famile Controller TCPIP.ISO.2. I was not successful. I cannot understand what is happening with this case. Regards

Suggestion To thank Quote Answer

2/27/2020 9:06 AM	Rate (1)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 11/14/2024 Posts: 8768 Rating: (1171)	Hello, Is there any other Ethernet card in PC? Is there Wireless card active? Best regards, Wizard

Suggestion To thank Quote Answer

3/9/2020 2:39 PM	Rate (0)
Murof Platinum Expert Joined: 8/3/2009 Last visit: 11/13/2024 Posts: 14165 Rating: (1774)	Hello deactivate Anti Virus Software and Firewall and do the Transer again. Do you have win 10 on the Runtime System? If you cannot get it work try to open a Server Request at Siemens Support. Bye Murof
	If this Information really helps, you could use the Rate function
Suggestion To thank Quote Answer

5/12/2022 8:33 PM	Rate (0)
Noob PG Regular Member Joined: 6/14/2018 Last visit: 11/5/2024 Posts: 7 Rating: (0)	The problem was with the network card driver, It was reinstalled and updated the driver, problem solved. There may be another issue with win10 where you will need to update the Windows Package: vcredist_x64. Microsoft Visual C++ 2010 x64 Redistributable (Can be found on the Microsoft webpage) https://www.microsoft.com/en-us/download/details.aspx?id=26999
	Last edited by: Noob PG at: 05/12/2022 20:35:16
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users Wizard Jen_Moderator

|

Share this page:

Share this page on...

Follow us on