Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

OP7 andOP77 test program

Created by: Peterako at: 8/10/2013 6:24 AM (5 Replies)

Rating (0)

Thanks 0

6 Entries

8/10/2013 6:24 AM	Rate (0)
Peterako Experienced Member Joined: 3/27/2009 Last visit: 10/3/2024 Posts: 92 Rating: (6)	Maybe i am trying to reinvent a wheel. On my work we use a mix of OP7 and OP77 panels on different PLCs. No and then i am replacing panels because of defects. This mainly is the power supply switcher that need to be replaced. (5 euro part) No i am looking for a program that i can use to upload using protool and using my PC and USB/MPI adapter to test run the OP panel for a few hours. nothing special just having a little communication. Thanks in advance
	Last edited by: Peterako at: 8/10/2013 10:25 AM
Suggestion To thank Quote Answer

8/10/2013 9:06 AM	Rate (0)
Ste39 Platinum Member Joined: 1/21/2013 Last visit: 10/23/2024 Posts: 4620 Rating: (708)	Hi Peterako, If you need to load the program in OP7 need Protool, but you already speaks of this, what do you need? Explain better what you want to do.

Suggestion To thank Quote Answer

8/10/2013 10:32 AM	Rate (0)
Peterako Experienced Member Joined: 3/27/2009 Last visit: 10/3/2024 Posts: 92 Rating: (6)	I am using protool for up and down loading. I do not design the programs that is a external company. The problem is that all are used on board of ships so when a panel is repaird i want to functional test it to work, before the original program is loaded inside the panel and sent out for installation. The program to test / burn in for a few hours i am looking for. I can use protool to program the original program and keep under power but because there is no com. with the PLC i am not testing the communication.

Suggestion To thank Quote Answer

8/10/2013 10:45 AM	Rate (0)
Ste39 Platinum Member Joined: 1/21/2013 Last visit: 10/23/2024 Posts: 4620 Rating: (708)	Hi Peterako, Have a look this tread, read it well and, in particular, follow our friend Wizard: Working with ProTool Runtime and Simulator - Siemens Industry ...
	Last edited by: Ste39 at: 8/10/2013 10:53 AM
Suggestion To thank Quote Answer

8/10/2013 11:17 AM	Rate (0)
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 10/17/2024 Posts: 5697 Rating: (715)	Hello, I thinkPeterako is looking for a plc simulator to test the comunication with the panel. I'm afraid that is not possible. Get yourself an old plc to test your panels, a 200 series will do the job. Regards, Marcjan
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

8/10/2013 6:11 PM	Rate (0)
Peterako Experienced Member Joined: 3/27/2009 Last visit: 10/3/2024 Posts: 92 Rating: (6)	Thanks for the up dates yes i was thinking to use a plc and make a simple up down counting program that shows the result on the OP. All this just as a test and simulation for the communication.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on