Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

SIMATIC NET OPC C# Client licence

Created by: Naturephoenix at: 4/30/2016 5:49 PM (1 Replies)

Rating (0)

Thanks 1

2 Entries

4/30/2016 5:49 PM
Naturephoenix Posts: 16 Rating: (0)	I've successfully went through some of Siemens manuls and examples. I received data from PLC to Siemens C# app. It's working but after few mins I am getting message box Step 7 no valid licence key. Ok, this mean I can not just use their example OR I can not base my application on their connection code without licence? If the second statement is true, that means for each client application I need 1 licence? How much does it cost?
Naturephoenix Posts: 16 Rating: (0)
Suggestion

5/3/2016 10:17 AM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4766 Rating: (122)	Closed cause question posted twice. The second thread with the subject SIMATIC NET OPC C# Client licence is published within the conference Communication/Networks. Best regards Min_Moderator

Suggestion To thank
This contribution was helpful to 1 thankful Users Aviator_747

|

Share this page:

Share this page on...

Follow us on