Skip to Content

Register Login

工业业务领域支持中心

Technical Forum

Navigation

COMOS layout views

Created by: Ezekial43 at: 12/2/2014 5:38 PM (4 Replies)

Rating (1)

Thanks 0

5 Entries

12/2/2014 5:38 PM	Rate (0)
Ezekial43 Posts: 6 Rating: (0)	Does anyone have any suggestions how you can draw a line and have it lock orthogonally in a plane ( X, Y ) etc on an integrated layout drawing view. ? Seems very basic functionality that's readily available on most other packages. Also is it possible to radially dimension on integrated layouts ? many thanks
Ezekial43 Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

12/11/2014 6:36 PM	Rate (1)
Rob_F Experienced Member Joined: 4/27/2009 Last visit: 11/15/2021 Posts: 50 Rating: (32)	Hi, to my knowledge, there is no horizontal or vertical locking for drawing lines / connections. The lines / connections align themselves with the grid points. Kind regards

Suggestion To thank Quote Answer

12/12/2014 9:32 AM	Rate (0)
Ezekial43 Posts: 6 Rating: (0)	yes many thanks for the reply, that's pretty much what I thought , but as you can imagineit's very difficult if zoomed into a large layout drawing to have to rely on a potentially miniscule grid point to get a straight line.
Ezekial43 Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

12/23/2014 1:52 PM	Rate (0)
Rob_F Experienced Member Joined: 4/27/2009 Last visit: 11/15/2021 Posts: 50 Rating: (32)	Yes that's right...I hope that will improved in future. Merry Christmas

Suggestion To thank Quote Answer

12/23/2014 1:58 PM	Rate (0)
Ezekial43 Posts: 6 Rating: (0)	yeah cheers merry Christmas to you
Ezekial43 Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on