Skip to Content

Register Login

工业业务领域支持中心

Technical Forum

Navigation

Drive monitor Backup

Created by: ALGUDKAR RAO at: 3/20/2013 5:49 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

3/20/2013 5:49 PM	Rate (0)
ALGUDKAR RAO Posts: 621 Rating: (10)	hi another one thing was forgot to how to take Backup parameter tnhrogh drive monitor
ALGUDKAR RAO Posts: 621 Rating: (10)
Suggestion To thank Quote Answer

3/21/2013 1:32 PM	Rate (0)
Technology Team Platinum Expert Joined: 10/11/2006 Last visit: 11/14/2024 Posts: 5941 Rating: (816)	Hello, there is a upload possibity in the drivemonitor. You can upload the complete data set, or only the changed parameter (against factory setting). I recommend to do both uploads - in the complete upload you have information about the device, firmware, ... and in the changed is useful for commissioning more axis with one dataset.
	With best regards, Technology Team Application consulting and pre sales support for SINAMICS, SIMATIC Technology, SIMOTION, SIMOTICS and MOTION CONNECT
Suggestion To thank Quote Answer

5/26/2013 7:07 PM	Rate (0)
Balajirajendran Posts: 29 Rating: (0)	Hi, It's a simple method to bachup parameter using Drive monitor. Go to File,Upload,Basic Device complete.
Balajirajendran Posts: 29 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on