Skip to Content

Register Login

工业业务领域支持中心

Technical Forum

Navigation

S5 eeprom adapter for Field PG M3 (798-0CA00)

Created by: karolewsky at: 1/25/2012 7:57 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

1/25/2012 7:57 AM	Rate (0)
karolewsky Posts: 26 Rating: (0)	Hi all, Have You guys been using the S5 eeprom memory card adapter? I have problem in connecting the card to the programmer.I put the adapter into the slot. Than I connect an S5 eeprom to it. But got no results. It's written on a leaflet I should have some dots shown on the adapter and the device, but there are no bulbs no my adapter. I downloaded the manual for field PG M3 and there is a description for the status display lights that I should have a green light if i insert the memory card module reader and while it is active(if i understand it correct:). But i had no green light indicated for that. I also tried to use the S5 eeprom software that had been already installed but I had error 900 which i think says i have the memory card not inserted into my field PG. I also have no info in my device manager while inserting the card that it had recognized a new device. Do any of You guys know what can I be doing wrong. I have actualy no expierience with S5. So I'm quite yellow to it:) Thank in advice for any reply Greets to all.
karolewsky Posts: 26 Rating: (0)
Suggestion To thank Quote Answer

1/25/2012 7:13 PM	Rate (0)
Brandon Costa Posts: 29 Rating: (2)	the best way to move programming from one drive to another http://www.ctiautomation.net/AC-Tech-EPM-Programming-Module.htm
Brandon Costa Posts: 29 Rating: (2)
Suggestion To thank Quote Answer

2/6/2012 1:58 PM	Rate (0)
Sensorik Advanced Member Joined: 3/8/2011 Last visit: 10/14/2024 Posts: 49 Rating: (4)	Hello, please check your bios settings, wheather you have enable the parameter: PCI-MPI/DP. You will find this setting in the bios setup under: Advanced > Peripheral Configuration. You have to enable this setting. Have a nice day

Suggestion To thank Quote Answer

3/12/2012 6:31 PM	Rate (0)
cbcX Posts: 43 Rating: (0)	Interesting thing... I found from the Tech Support hotline that only certain M3Field PGs have the S5 hardware built into them. Even though mine came to me with the S5 software installed, the PG does not have the S5 hardware installed in it so I cannot read or write EEPROMS nor can I go online with a CPU.
cbcX Posts: 43 Rating: (0)	Last edited by: cbcX at: 3/12/2012 6:31 PM
Suggestion To thank Quote Answer

3/13/2012 8:17 AM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 11/1/2024 Posts: 10229 Rating: (1181)	cbcX Interesting thing... I found from the Tech Support hotline that only certain M3Field PGs have the S5 hardware built into them. Even though mine came to me with the S5 software installed, the PG does not have the S5 hardware installed in it so I cannot read or write EEPROMS nor can I go online with a CPU. Yes, it is mentioned in manual too. And interesting thing is no S5 hardware but bought S5 software. Best regards, Hristo Mihalev

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on