Skip to Content

Register Login

工业业务领域支持中心

Technical Forum

Navigation

Wincc Flexible 2008 Runtime with S7-1200

Created by: Shebi87 at: 1/13/2023 7:30 AM (2 Replies)

Rating (0)

Thanks 1

3 Entries

1/13/2023 7:30 AM	Rate (0)
Shebi87 Bronze Member Joined: 10/22/2011 Last visit: 11/16/2024 Posts: 299 Rating: (1)	Dear All, can I connect S7-1200 with 6AV6613-1FA51-3CA0 ? i want to connect some analog input dsiplay and need data logging please help

Suggestion To thank Quote Answer

1/13/2023 8:26 AM	Rate (0)
Cocolino Silver Member Joined: 4/8/2021 Last visit: 10/31/2024 Posts: 639 Rating: (107)	Hi Shebi87, I'm not so experienced with WinCC Flexbile, but after a short online search I've found this FAQ: https://support.industry.siemens.com/cs/ww/en/view/38111886 I hope you find it useful :)
	Best regards, Cocolino Don't forget to use the Rate Function if you find my answer useful :) THX :)
Suggestion To thank Quote Answer

1/20/2023 2:27 PM	Rate (0)
Murof Platinum Expert Joined: 8/3/2009 Last visit: 11/15/2024 Posts: 14176 Rating: (1774)	Hello Shebi87 Yes the way in the FAQ should work. I tested it in past a few times. Important is if you use the latest FW for your S71200 then you have to activate the legacy HMI communication to communicate also with older HMi devices and versions (and activate PUtGet comuncation and work with absolute DBs without optimized Blcok Access )
	If this Information really helps, you could use the Rate function
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Cocolino

|

Share this page:

Share this page on...

Follow us on