1/18/2024 9:53 AM | |
Joined: 8/12/2021 Last visit: 8/16/2024 Posts: 322 Rating:
|
Hi! You cannot communicate with a device on another network if you do not have a communications card, a coupler or a router that addresses the IPs. This FAQ may help you.
|
If this Information really helps, you could use the Rate function |
|
This contribution was helpful to
1 thankful Users |
1/22/2024 9:38 AM | |
Joined: 7/21/2021 Last visit: 7/6/2024 Posts: 7 Rating:
|
yes i do that as you said but can you send me the cabling diagram between all these devices (PLCs and Routers ) |
1/27/2024 9:11 AM | |
Joined: 7/21/2021 Last visit: 7/6/2024 Posts: 7 Rating:
|
thank you there is a last thing that I need to know can you suggest to me a type of router that can do work well |
6/25/2024 5:21 AM | |
Joined: 6/19/2017 Last visit: 8/5/2024 Posts: 8175 Rating:
|
New question published by JP82 is split to a separate thread with the subject How to communicate PLCs of different subnets?. Best regards |
My Forum is the place to personalize your profile, |
|
Follow us on