10/12/2014 7:39 AM | |
Posts: 20 Rating:
|
Nobody can answer to this problem? |
10/12/2014 1:32 PM | |
Joined: 12/1/2009 Last visit: 6/7/2024 Posts: 672 Rating:
|
Dear pgbuz, it seams that it is currently not possible to print direct from a LOGO! to a printer. Youcan check to print through a panel connected to your LOGO! Checkwith the vendor on the device below: http://www.youtube.com/watch?v=-gQ7yPxqaEM Vendor site: http://www.beijerelectronics.com/ Best Regards. |
Give us your feedback and show us your respect! |
|
10/13/2014 8:13 AM | |
Posts: 20 Rating:
|
Thank you for idea. I'm studying your solution. Other ideas from other people? |
10/13/2014 9:38 AM | |
Joined: 12/1/2009 Last visit: 6/7/2024 Posts: 672 Rating:
|
Dear pgbuz, I found the following document (search for "printer"). http://beijerinc.com/download/index.php?id=ix/usersguide If I understand correctly you should be able to generate your reports and print them to a connected printer via the USB or serial port of the panel. Double check with the vendor support service. Best Regards. |
Give us your feedback and show us your respect! |
|
10/13/2014 6:26 PM | |
Joined: 12/1/2009 Last visit: 6/7/2024 Posts: 672 Rating:
|
Dear pgbuz, I just got confirmed by Beijer that you can print direct from thatT4A panel to the printer (buttext only, no graphics). I hope that information helps you. Check with the supplier what kind/type of printer you can connect. Best Regards. |
Last edited by: TIBI68 at: 10/13/2014 6:28 PMGive us your feedback and show us your respect! |
|
10/13/2014 11:54 PM | |
Joined: 12/1/2009 Last visit: 6/7/2024 Posts: 672 Rating:
|
Dear pgbuz, you will use iX Developer Software to program the HMI. http://www.beijerelectronics.com/web/web_en_be_com.nsf/AllDocuments/BECA80D2FF04FBF5C12578F700489471 30 days Demo is free. Maybe you can install it on a virtual machine. Best Regards. |
Give us your feedback and show us your respect! |
|
Follow us on