Rating 
Thanks 9
| 2/15/2019 10:10 PM | |
|
Posts: 158 Rating:
|
Well under all block counts, size, etc...tells me I can't set to use w/ 0BA6 because "block name exceeds 8 characters...." I have verified 9 times that none of the block names is longer than 8 characters...what am I missing?? I need to get this program on a 0BA6. Attached is memory info LSC 8.2 windows 7 help! Mark Attachmentdata.pdf (507 Downloads) |
| 2/15/2019 11:04 PM | |
Joined: 12/27/2006 Last visit: 8/18/2024 Posts: 1197 Rating:
|
Open connections are NOT allowd in LOGO! Post the original programm .LSC hier, so we can look at it |
| 2/15/2019 11:16 PM | |
|
Posts: 158 Rating:
|
I don't have any 'open' connections...I replaced the 'X' coil with an 'M' and it didn't help, still says my block name is over 8 char.Attachmentprogramforforum.zip (481 Downloads) |
| 2/15/2019 11:32 PM | |
|
Posts: 158 Rating:
|
I have done this many times with other similar programs, so i know it can be done. |
| 2/16/2019 4:50 AM | |
Joined: 12/18/2014 Last visit: 11/3/2024 Posts: 34132 Rating:
|
I can not do that either. Please start a Support Request and send the program to Siemens. |
| 2/16/2019 6:16 AM | |
Joined: 10/20/2015 Last visit: 7/13/2024 Posts: 94 Rating:
|
Hello I managed in an "abnormal" way to convert it but I do not know if it works. Can someone tell me if can open it? *I suggest you next time use FBD. Attachmentmarkheuer.zip (458 Downloads) |
This contribution was helpful to
|
|
| 2/16/2019 6:40 AM | |
|
Joined: 10/20/2015 Last visit: 7/13/2024 Posts: 94 Rating:
|
Hello ixo. I am not sure if I can tell you that. It might be a problem.......for me at first..... |
Follow us on