Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Distributed I/Os'

Created by: Import-User-1 at: 9/6/2005 11:07 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

9/6/2005 11:07 AM	Rate (0)
Import-User-1 Posts: 3609 Rating: (29)	Hello, how can I read the measured value of a Sitrans T3K PA?. I have one 315-2DP CPU, one DP/PA Coupler and one Sitrans T3K PA, I have a network configured to 45.45 kbps, in that network I have the Sitrans T3K PA, but when I read the input address (5 Bytes)all bytes are in zero, the PLC not show any error. I have a bus terminating whit a resistor of 100 ohm and a capacitor of 1uf. Thanks in advance. Juan Guillermo Barrera G. Siemens S.A Medellín, Colombia.
Import-User-1 Posts: 3609 Rating: (29)
Suggestion To thank Quote Answer

9/6/2005 11:08 AM	Rate (0)
Import-User-2 Silver Member Joined: 8/10/2005 Last visit: 4/9/2024 Posts: 1486 Rating: (32)	Please select HW-config. Mark the adress field (blue). Press right mouse button on monitoring/controlling. Now you see the monitoring/controlling window. Please activate "watching" and display periphery. Otherwise you will only see zero.

Suggestion To thank Quote Answer

10/10/2005 10:16 PM	Rate (0)
saeed Posts: 115 Rating: (1)	Hello ,Dear friend If possible send me your project .I test it then answer you . B.R. saeed Email :saeedtaherkhani@yahoo.com
saeed Posts: 115 Rating: (1)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on