Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

hardware configuration for abb im module ci801 sw 1.6/1

Created by: Adinarayana at: 11/7/2022 2:01 PM (5 Replies)

Rating (2)

Thanks 2

6 Entries

11/7/2022 2:02 PM	Rate (0)
Adinarayana Regular Member Joined: 9/21/2013 Last visit: 6/3/2024 Posts: 8 Rating: (2)	Dear team, i have doubt in pcs7 hardware configuration. i have got project up gradation from abb to Siemens 410 controller, in this project i have to use abb io. in the hardware configuration i was downloaded ci801 sw1.5, this version of gsd file support ci801 sw1.6? please give me solution for this. Attachment WhatsApp Image 2022-11-07 at 7.31.04 PM.jpeg (435 Downloads)

Suggestion To thank Quote Answer

11/9/2022 10:16 AM	Rate (0)
cristian021091 Experienced Member Joined: 2/22/2021 Last visit: 3/24/2024 Posts: 114 Rating: (13)	Ummm ...not sure, but I think you're going to need an AC800M controller too, otherwise I have my doubts that you can link your modules directly to your Siemens 410 controller. From my experience with ABB and with PCS7 I would believe that this module needs a library to work and this library is only inserted in your AC800M project either in 800xA system or Compact HMI 800 system. After you link your CI801 to the project, you should configure your AC800M and there declare your inputs and outputs and then create a routine from where you do the reading and writing of data... but as I say, I would think that this is the way. Tell me how it goes, I regularly work with both systems but I have never had the opportunity to do what you mention.

Suggestion To thank Quote Answer

11/11/2022 5:42 AM	Rate (0)
Adinarayana Regular Member Joined: 9/21/2013 Last visit: 6/3/2024 Posts: 8 Rating: (2)	Thanks For your reply. i can link module directly to 410 controller. Previously i was done with allen bradley by using 315 plc. i think so we dont need abb controller or compact hmi.i will check and inform to you after completion my trials. please find the attached copy of allen bradley io configuration. Attachment allen bradley.png (390 Downloads)

Suggestion To thank Quote Answer

11/14/2022 5:05 AM	Rate (2)
Adinarayana Regular Member Joined: 9/21/2013 Last visit: 6/3/2024 Posts: 8 Rating: (2)	Finally completed wit abb ci801 im module communication with 410-5h. Attachment Downloads.zip (506 Downloads)
	Last edited by: Adinarayana at: 11/14/2022 07:44:50
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users Heisenberg2 Techno_Taru

5/29/2024 9:12 PM	Rate (0)
AutoGen_3500869 Joined: 5/29/2024 Last visit: 5/29/2024 Posts: 6 Rating: (0)	https://www.youtube.com/watch?v=dk5IW8YJZJ0 please find link your answer

Suggestion To thank Quote Answer

10/17/2024 1:38 AM	Rate (0)
AutoGen_4797380 Joined: 10/17/2024 Last visit: 10/17/2024 Posts: 1 Rating: (0)	so now you can connect your CI801 Sw 1.6 with 1.5 gsd file?

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on