Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

When system is in redundant mode data from cp 340 is not coming

Created by: IESpl at: 6/29/2024 7:25 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

6/29/2024 7:25 AM	Rate (0)
IESpl Advanced Member Joined: 6/9/2012 Last visit: 10/12/2024 Posts: 7 Rating: (0)	Dear All, i m workin on PCS7 v8.2. It is runing project. we just change IM153-2DP(6ES7 153-2BA10-0XB0) to IM153-4PN(6ES7 153-4BA00-0XB0). now problem is that CP340 is working only in Solo Mode, when system is in redundant mode data from cp 340 is not coming.

Suggestion To thank Quote Answer

7/1/2024 11:34 AM	Rate (0)
Techno_Taru Bronze-Expert Joined: 1/11/2019 Last visit: 10/30/2024 Posts: 789 Rating: (151)	IESpl Dear All, i m workin on PCS7 v8.2. It is runing project. we just change IM153-2DP(6ES7 153-2BA10-0XB0) to IM153-4PN(6ES7 153-4BA00-0XB0). now problem is that CP340 is working only in Solo Mode, when system is in redundant mode data from cp 340 is not coming. Kindly check the released modules list for the compatibility. Process Control System PCS 7 Released Modules (V8.0 SP2) If it is compatible and configured make sure downloaded the hardware configuration after changing in HW Configuration.
	Last edited by: Techno_Taru at: 07/01/2024 11:37:18
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on