brown_martin49

 

ixo65

Here is a possible solution for your program request.

 Hi everybody. I need help. I looked at some of the pump apps on the forum and everyone's requests for help and I found the IXO65's help was very close to what I needed but still needed a bit of tweaking. These adjustments are based on requests for help from everyone on the forum, I've put together requests that fit what I need.

And what exactly do you want to tell us with your post? 

brown_martin49

I want to keep it like this and add alternating time clocks for the 3 pumps. When I1 is open, the 3 pumps will start rotating every 60 minutes. When I2 is open, two pumps will run and pump until I1 turns off. When I3 opens, three pumps will run until I1 turns off. In your opinion, is this solution feasible?

A lot of things are possible, probably this too.

But probably a whole new program will be created.

And I wonder about the meaning of your suggestion. I don't see any point in changing the pumps every 60 minutes.

Try this.

The time for changing set you in the asynchronous pulse generator (B048).