12/9/2009 10:14 AM | |
Posts: 661 Rating:
|
Hi, the second parameter should come from a up/down counter. LIM = limit (threshold, to enable its output) This tells me, this LOGO! you are talking about is a 0BA3 generation or older. In later generations, the counter has two thresholds (ON, OFF). So if in an old LOGO! "LIM" was "1", you could enter "1" in "ON" and "OFF" in newer LOGO!´s. Perhaps this gets clearer if you look at the screentshots. Download the manual for your devices here. http://www.automation.siemens.com/simatic/portal/html_76/techdok_simatic/microsyst_techdoku.htm Attachmentcounter.zip (408 Downloads) |
Follow us on