Hello everyone, happy new year

I want to use the sample programs below in my project,

Ready-for-use example application for SIWAREX WP521 ST / WP522 ST

but when I change the cpu and select cpu1515, I get the following error.

This problem exists only with cpu 1515 and not with cpu1513.

I found that the problem is with cpu firmware version. 

 The latest version provided for my CPU is 1.8

(6ES7515-2AM00-0AB0)  but these functions are only available for FW v2 and above. 

To compile the program with this cpu, I must have the password of the siwarex function or write a program that can read the weight from the siwarex card. 

Is there any other solution to solve this problem?

 Can another function be used? 

Is there any other program to get data from siwarex card? 

I hope Santa will help me.

Firmware update for CPU 1515-2 PN

Hello Siwarexi,

you can now attach your file as I have increased the maximum attachment size.

Please note that the attachment size limit is a default setting and a forum security measure.

For the future, I recommend that you contact a moderator if you want to increase the maximum attachment size. You can do this via personal message or the suggestion function. Alternatively, you can upload the file via a file-sharing hoster so that the moderator can subsequently attach it as an attachment.

Best regards,
Jen_Moderator

Hello Siwarexi

If you can't attach the project file, please email me the file

thank you very much 

[snip]

Siwarexi

Hello Madadi,

Now attached the TIA Portal project.

Best regards

Siwarexi

 Hello Siwarexi 

Thank you very much , the problem is solved