hello, in your reply you recommend 

ixo65

 Refer to S7 sections for detailed information about

server/client connection.

 

 what document you mean? I have third-party HMI panel (Delta Electronics) which works fine with ISO-on-TCP S7 PUT/GET for 1200 PLC, but how to setup LOGO PLC inself to enable S7 communication from 3thd-party device like this panel? We have these:

Logo8 #: "6ED 1052-1MD00-0BA8", firmware 1.81.03
LogoSoftComfort 8.2.0

Should I add HMI station in LOGO project and specify TSAPs (local and remote), IP, etc. Please give an idea for this setup. 

BR,

Yevhen

------------------------------------------------------------------------------------------
Split from LOGO8 - FS4..

Helmut_13

Hi,

goto: www.siemens.com/logo and check the application examples. Here you can find examples how to connect LOGO! 8 to Siemens HMI and S7-PLC's.

If there is nothiing special, then this may be a help for you to get it to work.

Hope this helps

 Hi, I went to the application example and seemed found what I need. It is app example to connect HMI WinCC flexible - link.  It should work with  v7 and v8 of LOGO.

I tried it with my LOGO v.8 FS04 and KTP600PN and it does not worked.  I suppose the issue is with firmware FS04, (becuase really it worked with v7 of LOGO I remember that).  Do you know the difference between FS versions and how they affect S7 comm. possibility of LOGO v8?

With the S7 connection, you just need to config your 3rd-part HMI to connect LOGO's TSAP e.g.: 11.0, there is no configurations needed at LOGO side.

you also can connect with Modubus on TCP Port:510

eam_rts

 hello, in your reply you recommend 

ixo65

 Refer to S7 sections for detailed information about

server/client connection.

 

 what document you mean? I have third-party HMI panel (Delta Electronics) which works fine with ISO-on-TCP S7 PUT/GET for 1200 PLC, but how to setup LOGO PLC inself to enable S7 communication from 3thd-party device like this panel? We have these:

Logo8 #: "6ED 1052-1MD00-0BA8", firmware 1.81.03
LogoSoftComfort 8.2.0

Should I add HMI station in LOGO project and specify TSAPs (local and remote), IP, etc. Please give an idea for this setup. 

BR,

Yevhen

------------------------------------------------------------------------------------------
Split from LOGO8 - FS4..

 Hello Sir,

Are you done with Logo plc and Delta Hmi communication. 

I want to do same configuration, so pl guide me.