Hola,

Tengo el mismo problema "La memoria del MB está llena. Se ha guardado la ubicación del bloque."

Ya borré el programa desde el Logo, pero obtengo el mismo Warning cuando intento transferir el programa desde el PC ----> Logo.

Has encontrado alguna solución.

Saludos

----------------------------------------------------------------------------------------------------
Translation from Moderator:

Hello,

I have the same Problem, "The MB Memory is full. It has kept the Location of the block." And I detected the program from the Logo, but I get the same Warning when I try to download the program from the PC ----> Logo. Have you found a solution?

Cheers

Hi Helmut_13,

Your reply is very helpful, and your explanation very clear.

I'm working on a big program (about 300 blocks), and now I can go on.

Thank you,

mfontuy

Hello:

    I have the same message "The location of MB memory is full. Has kept the location of the block", when i try to save as a ".bin" file. After, he file "LOGO_U_P.bin" is created but when i copy this file in a SD card to transfer to the LOGO, the SD don´t download any file and clear the program inside the LOGO. My LOGO show a message "empty program" and i don't have any program in the SD and in the LOGO.

   How can i keep at least the LOGO program? It's possible empty the MB memory or change the MB memory?

   Thanks, 

Thanks for the answer.

Ok. Then I undestand the next issue:

    If a backup "LOGO_U_P.bin" file show the message "The location of MB memory is full. Has kept the location of the block", i can´t use .bin file in a SD card to download into the LOGO. I can only download the program .lsc from the PC, can't I?

   Thanks,