Control unit Stopped parameter _r2=44:Switching on inhibit-supply with STO terminal W/24 V (Hardware)

We have supplied CU250S-2PN: 6SL3246-0BA22-1FA0 F

PM240 : 6SL32410-1PE24-5UL0: 22 KW

does somebody faced such problem ?

we have checked terminal, parameters and no STO/safety enabled. still it is giving such messages.

is there any other issue? any points to observe?

Need help to find possible problems.Last three days i am struggled for resolving this issue 

 I have also face same problem .

Switching on inhibited r2-44 showing.

I have using cu240 e2pn and my drive have profinet communication. 

Please siemens team help me

Muthu Krish

Control unit Stopped parameter _r2=44:Switching on inhibit-supply with STO terminal W/24 V (Hardware)

We have supplied CU250S-2PN: 6SL3246-0BA22-1FA0 F

PM240 : 6SL32410-1PE24-5UL0: 22 KW

does somebody faced such problem ?

we have checked terminal, parameters and no STO/safety enabled. still it is giving such messages.

is there any other issue? any points to observe?

Need help to find possible problems.Last three days i am struggled for resolving this issue 

When you go online with the drive in Starter/Startdrive, what problems are you seeing in the Safety Integrated function?

Has this been running for a while and suddenly will not start?  Or, is it newly commissioned and will not start?

active_engg

 I have also face same problem .

Switching on inhibited r2-44 showing.

I have using cu240 e2pn and my drive have profinet communication. 

Please siemens team help me

Muthu Krish

Control unit Stopped parameter _r2=44:Switching on inhibit-supply with STO terminal W/24 V (Hardware)

We have supplied CU250S-2PN: 6SL3246-0BA22-1FA0 F

PM240 : 6SL32410-1PE24-5UL0: 22 KW

does somebody faced such problem ?

we have checked terminal, parameters and no STO/safety enabled. still it is giving such messages.

is there any other issue? any points to observe?

Need help to find possible problems.Last three days i am struggled for resolving this issue 

 

Parameter r2 shows  44

And this is 2 year old running drive.

Drives all command controlled through PLC 1200. 

I have checked all blocked of PLC ,all are OK.

And drive does not show any fault.

Only r2-44 occurred 

When power off and again on then it running after some time of running r2 again goes to 44 and no run command  taken

It sounds like the safety integrated function required an E-Stop activation and clear with a period of "after some time" (the default is 80 hours I think).

active_engg

Parameter r2 shows  44

And this is 2 year old running drive.

Drives all command controlled through PLC 1200. 

I have checked all blocked of PLC ,all are OK.

And drive does not show any fault.

Only r2-44 occurred 

When power off and again on then it running after some time of running r2 again goes to 44 and no run command  taken

I don't understand what you say 80 hours?

This is showing in starter software.

I have tried so many things but problem still not solved.

0_Einstein

It sounds like the safety integrated function required an E-Stop activation and clear with a period of "after some time" (the default is 80 hours I think).

active_engg

Parameter r2 shows  44

And this is 2 year old running drive.

Drives all command controlled through PLC 1200. 

I have checked all blocked of PLC ,all are OK.

And drive does not show any fault.

Only r2-44 occurred 

When power off and again on then it running after some time of running r2 again goes to 44 and no run command  taken

 

active_engg

I don't understand what you say 80 hours?

But you can understand following?

0_Einstein

It sounds like the safety integrated function required an E-Stop activation and clear <snip>

Have you done it?

 What you want to say?

jacek d

 

active_engg

I don't understand what you say 80 hours?

But you can understand following?

0_Einstein

It sounds like the safety integrated function required an E-Stop activation and clear <snip>

Have you done it?

 Why siemens team making such type of foolish statements and not give any resolution?

jacek d

I asked if you had done what 0_Einstein had suggested. Usually there's a big red pushbutton for this. 

active_engg

 Why siemens team making such type of foolish statements and not give any resolution?

jacek d

I asked if you had done what 0_Einstein had suggested. Usually there's a big red pushbutton for this. 

 

We can't help individuals having problems to read with understanding. Maybe apart suggesting to find less intellectually demanding occupation.

 hi did u got problem solved ,?

I also facing the same problem .

r2 -[44] Switching-on inhibited - supply STO terminal w/ 24 V (hardware) 

through starter I looking for safety integration function still inactive ,

control word status safety enable missing

Dear experts please help.

CUG120C D - F USS 

POWER MODULE G120 C

6SL3210-1KE31-1UB1.

Muthu Krish

Control unit Stopped parameter _r2=44:Switching on inhibit-supply with STO terminal W/24 V (Hardware)

We have supplied CU250S-2PN: 6SL3246-0BA22-1FA0 F

PM240 : 6SL32410-1PE24-5UL0: 22 KW

does somebody faced such problem ?

we have checked terminal, parameters and no STO/safety enabled. still it is giving such messages.

is there any other issue? any points to observe?

Need help to find possible problems.Last three days i am struggled for resolving this issue 

sudhy

 hi did u got problem solved ,?

I also facing the same problem .

r2 -[44] Switching-on inhibited - supply STO terminal w/ 24 V (hardware) 

through starter I looking for safety integration function still inactive ,

control word status safety enable missing

Dear experts please help.

 You should read this thread from the beginning, the answer is there already.

Thank you for the reply,

Yes i read all the messaged from begining , and got understood need to do e stop activation.

Is there any procedure for this?, Dear experts , can you guide me ?

And I able to solve this problem with replacing the cu with failed cu parameters , and working fine.

But i need to reset the cu for other drive .

Cu which is locked was running , and there is no safety integration configured , even i done restore defauls also but same status showing at r2- 44.

Hope fully,

Regards

 Hi dear expert , 

I am still stuck with same probelm ,

can u explain how to do e stop activation , or reset this .

Hati

 

sudhy

 hi did u got problem solved ,?

I also facing the same problem .

r2 -[44] Switching-on inhibited - supply STO terminal w/ 24 V (hardware) 

through starter I looking for safety integration function still inactive ,

control word status safety enable missing

Dear experts please help.

 You should read this thread from the beginning, the answer is there already.

sudhy

 Hi dear expert , 

I am still stuck with same probelm ,

can u explain how to do e stop activation , or reset this .

Hati

 

sudhy

 hi did u got problem solved ,?

I also facing the same problem .

r2 -[44] Switching-on inhibited - supply STO terminal w/ 24 V (hardware) 

through starter I looking for safety integration function still inactive ,

control word status safety enable missing

Dear experts please help.

 You should read this thread from the beginning, the answer is there already.

 

 Whitch off the STO signals.

Hi , Hati, 

Thankyou for the reply

Actucally,  my drive was  running ,suddently changed to to inhibit , r2= 44,

as per the above conversations , i checked these things, 

1 power module STO dipswitches is off state,

2 there is no safety configuration in the safety integrated tree, checked through online ( starter)

     [DI-4 and DI 5 is used for multi speed]

3 restore to defaults done for the safety settings also , for the whole control unit parameters.

  re commissioning done , then after motor id happens succeeded , cu changing to r2-44 .

4 backup parameters through keypad and downloaded to another cu then its working fine.

I  want to know how to reset this cu to normal, or " E'" activation procedure .

please  advice me to clear this. 

regards .

sudheesh.

The drive power module having a hardware interlock. If your CU was not correctly seated on that slot properly that time the 44: Switching on inhibited - supply STO terminal w/ 24 V (hardware). To correct that issue. Inset that CU correctly.