Hello William B,

I do not believe that the User fdag1 had a question.
It reads more like finding .....

ixo65

Hello William B,

I do not believe that the User fdag1 had a question.
It reads more like finding .....

Hi my friend.. always good to hear from you.

There is a strong possibility that you are right.
I missed the fact that  <fdag1>  was answering his own question.

Regardless.. I think my response still applies for the exchange in ideas.

William B

Ok, thanks for that.

I am running out of Function Blocks in the master logo, therefore i have to  distributing the user program over several logo's. That is de idee behind this topic.

There are several points that are not clear for me.

1 So a logo slave can also execute a program. Where can we create a diagram entry for the slave              logo?

2 If you look at the property of the connections. We see that the connections between logo master1 and     HMI or Logo-Master2,  TSAP    is used. For the connection between Logo-Master1 and Logo-Slave         TSAP is Not used, What is the difference?

3  On Logo Master1, 192.168.0.150, what is the conection port at the bottom left of this device?

Attached is my configuration.

192.168.0.150 is the master, in the project overview we have Logo8_Master1 Diagram created by Logosoft when the master logo is added to the project.

192.168.0.151 is the added slave. For this device logosoft did not create a diagram file. How can we add a diagram file for this module? 

192.168.0.152 is a second master, here a diagram is automatically created.

1.) A slave logo can execute a program, therefore no diagram of a slave logo can be created.

2.) Because the slave logo is just a slave, she is not communicating independently. The communication is only one side of the master logo. Therefore no TSAPs.

3.) The question about the "double box" I can not answer. Have to no information found.

I think I know now the function of "double box" in the logo Symbol in network mode.
The logo may indeed create 8 Static and dynamic 16 TCP / IP connections.
The static connenction need TSAPs on the server, the dynamic Connection apparently only on the client side.
I have created a project with 11 logos with 8 static connections and with 3 dynamic.

See also the attacheded extract from the nanual.

Thank you for clarifying the network capabilities of Logo8.

Adding more than one master is solving the 400 Function block limitation, that i have in my project.

Best regards,

Fabrizio