Pee Ell Sea

Hi

The simple answer is you look in the documentation and it will tell you. Problem is that inputs go from the plc to the part program. You need an output to go from the part program to the plc. In which case you may as well use an M code.

Pee

 Hi, which documentation, the list manual?

In my case I'd like to know how DB10.DBW212 is managed (which command is used in part program to write it)

gtsolid

 In my case I'd like to know how DB10.DBW212 is managed (which command is used in part program to write it)

 Chapter A4

https://support.industry.siemens.com/cs/ww/en/view/109481520