Hallo. 

I would like to migrate a Step7 project (S7 300) to Tia. 

The PLC block are migrated successfully, but the Hardware configuration no, It is empty. 

It shows CPU 315-2PN/DP (unspecific CPU) .

Is it normal, or I'm doing something wrong? 

HW configuration on Simatic manager is compiled ok.

thanks

daercole

I would like to migrate a Step7 project (S7 300) to Tia. 

The PLC block are migrated successfully, but the Hardware configuration no, It is empty. 

It shows CPU 315-2PN/DP (unspecific CPU) .

Is it normal, or I'm doing something wrong? 

HW configuration on Simatic manager is compiled ok.

 You CPU in the old project is too old for the TIA version you are using. You should read the Migration log, to get  an idea what has happened during the migration.

You should always check before migration, if TIA supports the hardware you are migrating.

Hati

 

daercole

I would like to migrate a Step7 project (S7 300) to Tia. 

The PLC block are migrated successfully, but the Hardware configuration no, It is empty. 

It shows CPU 315-2PN/DP (unspecific CPU) .

Is it normal, or I'm doing something wrong? 

HW configuration on Simatic manager is compiled ok.

 You CPU in the old project is too old for the TIA version you are using. You should read the Migration log, to get  an idea what has happened during the migration.

You should always check before migration, if TIA supports the hardware you are migrating.

 Hi.

The Hardware is Step7 300, I would like to manage it with Tia, this is because the panel is new and it is TP900 (that can be programmed only with TIA)

The CPU can be managed with TIA. (see picture)

Unfortunately I do not find any specific log related to the hardware .. only concerning the software. 

(maybe TIA Portal do not migrate Hardware?) 

thanks

TIA manages hardware migration also, as long as the hardware is in TIA catalog.

Try to make two steps in Step7, before migration to TIA. First save the project with Save As, and then click on the box: With Reorganization. This will delete all old remains from the project. After you ave saved it with a new name, then run Check Block consistency.

After these steps, try to do the migration again to TIA.

Hati

TIA manages hardware migration also, as long as the hardware is in TIA catalog.

Try to make two steps in Step7, before migration to TIA. First save the project with Save As, and then click on the box: With Reorganization. This will delete all old remains from the project. After you ave saved it with a new name, then run Check Block consistency.

After these steps, try to do the migration again to TIA.

 I can't let it working. 

I tryed also with new empty project. 

I setup a Rail + CPU + 1 x 16 DI .

Compiled

Open OB1 , compiled. 

Migrate with 14 and 16 same result. 

This is the general log. 

well... the HW CFG it can be created, but when you create some, a typing error, is always behind the door.....