For the TD screen for LOGO 0BA6 or 0BA7 you need no other software than LOGOSoft Comfort, the same you use to programm the LOGO.

In a textblock you can make the choice to make text fot the LOGOscreen or the TD screen, or both.

The TDE screen is the same, but only for LOGO 0BA8

You can also use real HMI screens to you LOGO 0BA7 and 0BA8. (KTP series screens)

For programming the LOGO for use with this screens you can use also LOGOSoft comfort.

The inputs, outputs and Markers, you can directly reading and switching (Outputs and Markers) in the HMI screen. For use internal values of bloks in the LOGO,  timervalue, contervalue etc, you need te make Virtual Inputs and Outputs. Its called VM mapping. You can read a lot of it in the Help menu of LOGOSoft comfort.

For programming the (real) HMIscreen you need additional software (WinCC)-TIA portal of Siemens

There are a lot of panels you can use with LOGO

I think is easier if you explain what you intend to do.

For simple applications you need no PC just the local interface:  6x12 display, directional, ESC and OK keys (0BA8 model); with TDE you have a 6x20 display, directional, F1, F2, F3, F4, ESC and OK keys and the possibility to place the interface at approx. 100 meters with UTP cable or if you have a LAN connection anywhere in the reach of that LAN.

If you want more, the internal web server allows you to go global and/or mobile J.

In any of this instances you need to build an interface (menu) on top of your application. If you don’t know how look through the example applications that come with LOGO!Soft Comfort. You will learn how to display the information you need and how to input data with directional keys, F keys or digital inputs. 

Hello!

thank you for your support
please I still do not have this so I'm looking

What software should I use to manipulate the logo! 0BA8 remote from my pc?
NB: I use now logo-soft comfort to create programs and once transferred into the logo, all goes well, because no error message is displayed on logo.
but I want to handle this logo from my pc (on or off the inputs or outputs from the software installed on my pc)

please I am beginner
  help me

You can not force an input or output from the LOGO soft comfort software.

you can control digital inputs using the web server; in this case, your program have to include the entry you want to assign to that Digital Input. For example: DI1 activates something. You can add a block called F1 to activate the same thing in parallel. The block F1 is on the TDE and you can press buttons on the TDE remotelly using the web server.