TechSupport SINAMICS S210

 

MarekN

Hello all

I have s7-1200 fw 4.2 and sinamics s210 v5.2 need only easy movement from this drive but need controlling by profinet telegram 3. My tiaportal is v15 upd 4. Are somebody have information about telegrams of this unit?

In attachament is very similar document what i need but other model.

Need only start stop, error code and speed, ideal with encoder for position. 

Thanks for answers regards Marek

Hello,

I just want to give some additional answers about SIMATIC S7-1200 combined with SINAMICS S210.

The combination SIMATIC S7-1200 and SINAMICS S210 is not in focus, because SINAMICS S210 is a high dynamic drive which requires IRT communication. IRT Communication will be supported with SIMATIC S7-1500(T) controllers.

In the operation Instructions of the SINAMICS S210 you will find a detailed list of the supported telegrams and also a detailed description bit for bit:

Standard telegram overview:

https://support.industry.siemens.com/cs/ww/en/view/109771824/124691001483

Detailed bit view:

https://support.industry.siemens.com/cs/ww/en/view/109771824/123923848075

When working with SIMATIC S7-1200, then we recommend SIMATIC S7-1200 Firmware V4.2.3 or higher, because with older SIMATIC S7-1200 Firmware versions we faced problems with the data adaption of the maximum and reference speed. If customer does not want to work with FW V4.2.3 or higher, then the data adaption must be deactivated and the maximum (p1082) and reference (p2000) speed must be entered manually.

SIMATIC S7-1200 Firmware is available in SIOS:

https://support.industry.siemens.com/cs/products?search=Firmware-Update&dtp=Download&mfn=ps&o=DefaultRankingDesc&pnid=13683&lc=de-WW

Forum Topic:

https://support.industry.siemens.com/tf//ww/en/posts/s210-s7-1200-axis-error/202386/?page=0&pageSize=10

The combination between SIMATIC S7-1200 and SINAMICS S210 sometimes shows problems in the motor operation. We faced some mechanical noises. These noises where caused by unfortunate settings of the cycle times. If you will face such problems, then just refer to chapter “3.4 Recommendation of time setting with SIMATIC S7-1200” of the application example documentation from S7-1200 to V90 drive. The application example can be found here:https://support.industry.siemens.com/cs/ww/en/view/109743917

Regards,

Technical Support SINAMICS S210

Hello.

Thank you for information.

Is there Siemens S7-1200 firmware only on the Deutch language? Or it is multilanguage? Does the English language also included on firmware 4.2.3 and higher?

 

------------------------------------------------------------------------------------------
Split from Sinamics s210 - s7-1200 profinet.

SANNICAP

Hello.

Thank you for information.

Is there Siemens S7-1200 firmware only on the Deutch language? Or it is multilanguage? Does the English language also included on firmware 4.2.3 and higher?

https://support.industry.siemens.com/cs/products?search=Firmware-Update&dtp=Download&mfn=ps&o=DefaultRankingDesc&pnid=13683&lc=en-WW