Hello,

I have a ET200 SP (6ES7 155-6AU01-0BN0) v4.2 and I only have v3.3 and v4.1 in my TIA PORTAL v15 hardware catalog.

I am trying to find a way to find the v4.2 GSD, but I'm unable to find it on Siemens web page. Is this the solution I need or maybe it is easier to do another thing like downgrading firmware from v4.2 to v4.2?

Attached the image with the module diagnostic. 

Thanks 

Hello,

clear info is required, do you mean with add this station to some network like Profibus/Profinet or project this station as HW cfg working but isn't available in HW catalogue? This is important to differ because then you need maybe some HSP or HW Catalogue update. Pls take this to account for future.

Hello,

That is right, I have this ET200 SP connected to a profinet network and I have version 4.1 in hardware catalog, but not version 4.2 which is the version of the hardware. I tried downloading the HSP package for TIA v15 (link below), but the hardware I am looking for is not in there.

https://support.industry.siemens.com/cs/at/en/view/72341852

Thanks.

Hello,

ok, we have also available Search function (up right) where you can try find your answer. I've prepared some query for you, hope you'll find what you need: ET200SP GSD Search result

If you read the technical data of the IM module, what does it say about FW v4.2, and what TIA version is needed to use the new functions.

You can configure it as v4.1 in your TIA, and it will work.

Dear jodossanto2,

In general, the firmware V4.2 is compatible with V4.1 in the project.

please note, the "additional information for the module" is really an information only.

There must be another reason for the error. Please check the diagnostics buffer of the cpu.

regards

sancruz

D. Fort

We have the same problem. Any issue?

 Describe your problem, we don't have a chrystal ball.

Did you read what has been already written, because it does work like that.