Dear all,I"m a newbie , How to connect 2 Logos! 8 in LAN?

------------------------------------------------------------------------------------------
Split from LOGO!8 distributed network setup.

AutoGen_6700097

Dear all,I"m a newbie , How to connect 2 Logos! 8 in LAN?

Both LOGO!s must be in the same IP subnet e.g. 192.168.0.XXX . XXX is the adress of the LOGO! in the IP subnet. 

What I mean is how to connect the LAN cable between the CPU and the 2 logos!8, btw thanks for sending the video

You need only a normal ethernet cable like this.

Thanks sir, I will definitely use that cable. What I mean is, do I use a switch hub so that the 2 logos! 8 can be controlled by 1 CPU?

I'm sorry, but I don't understand what you mean.

I mean the physical LAN cable connection from the CPU to each logo!8, sir, do you use a router?

I don't know from which CPU you write.

But want you use more devices then the 2 LOGO!s in the network than use a switch.

You can use a simple Ethernet switch like “LOGO! CSM12/24“ (with 4 TCP ports), order number:

6GK7177-1MA20-0AA0

If you mean with „CPU“ a SIMATIC CPU with Ethernet port, you can put it to this switch too.

Thank you in advance for your answer,sir. What I mean by CPU is a computer that has LOGO!Soft Comfort V8.4 and Logo Web Editor installed on the same LAN network as the 2 LOGO!BMs.